Hunter Fans and Ceiling Fan Accessories - Guaranteed Lowest Prices plus FREE SHIPPING and NO TAX on 1000s of Ceiling Fans!

Question #8675 - Posted: 8/27/2010 12:20:11 PM
Ceiling Fans Question - Hunter Low Profile III 52 in. Model 20803

View Low Profile III 52 in. model 20803
What is the lowest recomended mounting hieght from floor. 20803
Answer: Building codes require ceiling fans to have a minimum of distance of 7 feet from the floor to the bottom of the blades.


Question #8646 - Posted: 8/26/2010 11:23:24 PM
Ceiling Fans Question - Hunter Auberville Model 28036

View Auberville model 28036
Is hunter auberville fan #28036 available with remote controle
Answer: You can add a remote control to the Hunter Auberville ceiling fan by clicking on the "Controls" button beneath the ceiling fan picture on the product detail page. Select the optional remote control model 27185 to add it to your fan before you add the fan to your cart.


Question #8627 - Posted: 8/22/2010 11:38:00 PM
Ceiling Fans Question
View page where question was posted
I have a Hunter Original ceiling fan that was in the house when we purchased it 25 years ago. It is a Model 25750 It has developed a rather severe wobble that I cannot balance out with the Hunter Balancing kit. Switching adjacent blades and putting the plastic clip in the various positions has no noticible effect. Should I try replacing the fan blades for the next step or have an expert look it over? If I need new blades, what would a set with the securing hardware cost? Thank-you.
Answer: It is not uncommon for someone (without your knowledge) to have hit the blades with a broom handle or something while the fan was spinning, which will bend one or more of the blade holders. It is also possible that one or more of the blades is warped...which can happen over the years if you are in a humid climate. To check for these issues, remove all of the blades and blade holders from the ceiling fan. Once you have the blades detached from the blade holders, stack the blades on top of each other and you will be able to see if any are warped. Do the same with the blade holders to see if one or more are bent to a different angle than the others. If any blades or blade holders are warped or bent, then call us to get them replaced. Give us a call and we will be happy to quote you a price and lead time for replacements. If you find nothing out of the ordinary, then double check the mounting hardware in the ceiling to make sure all screws are tight and that the junction box is not loose.


Question #8606 - Posted: 8/18/2010 10:29:54 AM
Ceiling Fans Question - Hunter Eco-Air Model 25120

View Eco-Air model 25120
Can you get a brighter led light to replace what comes with it? This in on the Hunter eco fan #25120. Thank you.
Answer: You cannot change the light fixture that is included with the Hunter Eco Air ceiling fan. The whole intent of the Eco Air ceiling fan is to be very Energy Efficient. The 9 Watt LED light fixture produces about as much light as a single frosted incandescent bulb...which is not very much light. In this case, the light fixture is designed to be used as supplemental lighting, so do not anticipate that the fan will light an entire room. The 9 Watt light fixture provides huge energy savings compared to other fans that use nearly 200 Watts.


Question #8605 - Posted: 8/17/2010 12:59:12 PM
Ceiling Fans Question - Hunter Stockbridge Model 23963

View Stockbridge model 23963
Follow-up to question #8597. Given that the 500 sq ft room is essentially square, can you provide guidelines for placement of two fans in the room? Thanks. P.S. I am actually considering the Emerson Eco, which has about the same ceiling-to-blade distance as the Minka Aire Concept II you recommended. My celing is actually 93", a little higher than I thought.
Answer: When installing multiple ceiling fans in a single room, you want the ceiling fans positioned equidistantly from each other and from the walls. To determine the position of each fan, simply divide the space into equal areas based on the number of fans to be installed. Each fan then needs to be placed in the center of each area. So, for 2 fans...just cut the room in half and install each fan in the center of each halved space. If the room is rectangular, cut the room in half at the center of the longer wall. You will find a diagram and more information here: How to Position 2 Ceiling Fans in a Room
Here is a link to the super efficient Emerson Midway Eco Ceiling Fan mentioned in the posted question.


Question #8604 - Posted: 8/17/2010 12:35:59 PM
Ceiling Fans Question
View page where question was posted
My old fan of thirty years has an electrical growl each rotation. I was told if you dont have the correct switch or wired properly the growl is there. Is this true? can tou tell me the correct wiring diagram. Or is it something else.
Answer: If you do not wire a ceiling fan properly, it will not work at all and will most likely short out and throw a breaker, so the way your fan is wired is certainly not the reason it is making noise. If you have a dimmer switch on the wall that you are using to control your fan, that will introduce a humming noise that will worsen over time and eventually cause permanent damage to the windings in the motor. That damage can eventually cause your fan to produce a growling sound on each rotation. The same issue can be caused by using a control that is not designed specifically for ceiling fans or that is underrated for the amperage of your fan. If you own a Cast Iron Hunter Original ceiling fan, it probably just needs oil. It is also quite likely that after 30 years, your motor is just worn out and it is time buy a new fan. If you can tell me what brand and model of fan you own, I may be able to give you more specific information. If you email me a picture of your ceiling fan, I may be able to identify it. Email pictures to: gregt@hansenwholesale.com


Question #8603 - Posted: 8/17/2010 12:26:18 PM
Ceiling Fans Question - Hunter Royal Palm Model 23895

View Royal Palm model 23895
Does it woble? I have a 9ft ceiling and I plan to use a 12" down rod
Answer: The Hunter Royal Palm is a good quality ceiling fan that can in fact be balanced during installation so that it does not wobble. Keep in mind that most ceiling fans will wobble if they are not properly installed and part of the installation process is balancing the fan blades. There are a few higher quality ceiling fans (for about 2 times the price) that do not require balancing during installation, and there are quite a few lesser quality fans that cannot ever be balanced.


Question #8601 - Posted: 8/17/2010 11:41:50 AM
Ceiling Fans Question - Hunter Covent Garden Model 21897

View Covent Garden model 21897
iS THIS FAN AVAILABLE WITH WHITE BLADES?
Answer: Unfortunately, Hunter does not offer blade options for their ceiling fans (with a few exceptions), so the Covent Garden is only available with the reversible Cherry/Dark Walnut blades that are included in the box. I would recommend taking a look at the Emerson Crown Ceiling Fan Model CF4500AB, which is a similar style ceiling fan that does not come with blades or lights, so you can choose from dozens of blade finishes (white being one) as well as many different light fixtures to customize the fan however you like.


Question #8597 - Posted: 8/16/2010 3:00:43 PM
Ceiling Fans Question - Hunter Stockbridge Model 23963

View Stockbridge model 23963
Is this fan a good choice for a 500 sq ft room? The room is essentially a square with lowish (7.5 ft) ceilings. Or would I be better off with 2 smaller fans? Thanks.
Answer: The Hunter Stockbridge is a great ceiling fan for a 500 sq ft room, but your ceilings are simply too low for this fan to be appropriate. I would suggest you use two 52" flushmount ceiling fans so that you have better circulation and more headroom. I would recommend the Minka Aire Concept II Ceiling Fans for your application.


Question #8594 - Posted: 8/16/2010 2:49:20 PM
Ceiling Fans Question - Hunter Covent Garden Model 21897

View Covent Garden model 21897
we want to purchase the Hunter Convent Gardens fan to hang over our kitchen table. We need a close to the ceiling down rod. Is there one available for this fan in a burnished brass finish?
Answer: The Hunter Covent Garden ceiling fans come with a 3 position mounting system, which means they can be flush mounted (without a downrod), mounted using the standard downrod, or a longer downrod can be added. So, you can install the fan close to your ceiling without purchasing any additional hardware.


Question #8580 - Posted: 8/14/2010 11:47:03 AM
Ceiling Fans Question - Hunter Fellini 72 in. Model 28614

View Fellini 72 in. model 28614
I need a longer down rod for a sharply angled great room ceiling since the radius of 36 and the longest down rod of 36 will hit ceiling What are my options ?? can I get a 48 " or 52 " downrod ...fixture plate on ceiling is 12" from floor ready to buy 8 fans within 10 days for new house ....all remote all with lights ...all need to be similar to this one Hunter Fellini 72 in. Model 28614
Answer: Hunter does not make downrods in the Brushed Cocoa finish longer than 36". So in cases such as yours, we recommend using a flat black downrod since it is neutral and will look fine with any darker finished Hunter ceiling fan. Flat Black downrods are available in 12" increments up to 72". If your ceiling is angled more than 30 degrees, you are also going to need a matching sloped ceiling adapter as well, unless you have built a flat spot in the ceiling where each fan will hang. Here are links to order these items separately:
• 48 " Hunter Flat Black Downrod Model 25148
• 60 " Hunter Flat Black Downrod Model 25149
• Hunter Sloped Ceiling Adapter in Flat Black Model 22174-BK
I would suggest that you call us to place your order to make sure you get everything you need.


Question #8563 - Posted: 8/10/2010 11:50:28 AM
Ceiling Fans Question - Hunter Lugano Model 28111

View Lugano model 28111
Can this fan be operated via a wall switch or only with the remote control.
Answer: There is no wall control option for the Hunter Lugano ceiling fans, so they can only be operated by the remote control that comes with the fan. If you must have a fan that operates from a wall control, you may want to consider the 3245T Casablanca Stealth Ceiling Fans which includes a 6 speed wall control and is available in the same motor and blade finish combination as the Lugano. The Stealth is a bit more pricey because it is a much higher quality fan and has more features.


Question #8558 - Posted: 8/10/2010 9:10:23 AM
Ceiling Fans Question
View page where question was posted
I love my hunter fans; however, one makes a ticking noise that I have traced back to the pivot socket or support socket, - what can I use to lubericate this to eliminate this noise? Scot
Answer: This usually occurs when a ceiling fan is out of balance. Read details about How to Balance a Ceiling Fan.


Question #8554 - Posted: 8/9/2010 4:08:01 PM
Ceiling Fans Question - Hunter Bay View Model 23980

View Bay View model 23980
do you carry the model name CASWYCK ceiling fan??? looking to purchase one
Answer: The Caswyck ceiling fan is a Hampton bay model which is not a fan that we supply or recommend. They are sold only by Home Depot...since Hampton Bay is their own house brand. Please give us a call so we can help you find a similar ceiling fan that is better quality.


Question #8548 - Posted: 8/9/2010 12:25:29 PM
Ceiling Fans Question - Hunter The Sontera Model 22436

View The Sontera model 22436
I purchased the Sontera fan and had it installed. The fan operates o.k. Using the wall and built-in fan switches. However, Only the fan turn-on feature works using the remote control and that only if held in some overhead position for some period of time. No other remote feature works from any position. Any suggestions or remote replacement ideas?
Answer: Try changing the dip switch settings in both the transmitter and receiver to a new setting (they must match). If this does not correct the issue, then contact Hunter Customer Service so they can help you trouble-shoot the problem and get your fan working properly. Here is the contact info: Hunter Customer Service at: 1-888-830-1326 or visit them online here: Hunter Online Customer Care. Had you purchased your fan from us, I would have our customer service department help you directly. Unfortunately, we do not have the wherewithal to offer that level of service to those who have purchased elsewhere.

Read more questions and answers here! >>