This Item is VIP Guaranteed!Don't like it once you get it? Don't Worry... We'll take it back within 90 Days and give you a FULL Refund! (No Restocking Fee - No Hassle)
We are so confident that the quality and appearance of this item will "Exceed" your expectations that if for any reason you do not like it once you open the box and see it,
we will take it back and give you a 100% refund with NO Restocking Fee within 90 days of your purchase!
Matthews Fan Co.Atlas Acqua Rotational Metal Ceiling Fan
Choose Custom Options & Accessories Here
There are currently no custom options for this fan in our database.
Please call if you need a downrod or some other customization.
Shown in Picture: Matthews Fan Co. Atlas Acqua Rotational Metal Ceiling Fan Model MG-AQ-CR-MTL in Polished Chrome with Polished Chrome Metal blades. The light fixture comes with this fan.. Low voltage recessed down light. The fixture uses 1-50W Bipin MR16 Halogen Bulb. The Atlas Acqua Rotational Metal is a Dual Head Dual Head style Ceiling Fan Designed for use indoors or outdoors in either damp or dry locations. This fan features a Dual 1/15 HP 3´´x3´´ McMillan Motor with a Unknown Degree Blade Pitch producing an AirFlow rating of 5 (where 5 is best). It is operated by a 3 Speed Remote Control. . The Acqua rotational ceiling fan is thoughtfully designed to resemble the molecular structure of water, the Earthʼs most precious resource. The Acqua offers fluid lines and quiet axial rotation. The motor heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angles of the motors to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotation is achieved by both motor head position and fan blade speed. The Acqua is offered in polished chrome, brushed nickel or Textured Bronze and comes with either wood blades without safety cages or metal blades with safety cages. It includes a 20´´ downrod that can be cut in the field to as short as 4´´. The fan is rated for Damp locations when used with metal blades. If wood blades are selected, the fan cannot be used in damp locations. This fan moves substantially more air than a typical ceiling fan and the wind it generates may be audible at higher speeds.
Ceiling Fan Comparison Graph
Ceiling Fan Comparison Graph
Breeze Rating: 5.5 (5 is best)
Wind Speed Factor: 4.06 MPH
Graph represents 37" blade span How to read our graphs
This graph makes it easy to compare features between fans. Pay particular attention to the "Breeze Rating" and "MPH or Wind Speed Factor" which give you the best idea of how much cooling effect you might expect from this fan.
Included Control (MG-REMOTE): 3-Speed Hand Held Remote Control with Reverse
Can I operate more than 1 fan from a single remote? Although it is possible to operate multiple ceiling fans from a single remote control, we do NOT recommend it with any brand. Doing so can cause your fans to get out of sync (one off and the other on, or one on high and the other on low) and getting them back in sync becomes quite a challenge. To avoid frustration, be sure to operate each fan from its own designated remote control.
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing.
Matthews Fan Co.
Matthews Fan Co. Atlas Acqua Rotational Metal
Features & Specifications
Dual 1/15 HP 3"x3" McMillan Motors Motor
4 out of 5 (5 is best)
37" blade span
Polished Chrome Metal finished blades (included)
913 to 1380 RPM
UL Listed for use indoors
UL Listed for outdoor DAMP locations in covered areas only. Cannot be directly exposed to rain.
Single Globe Fixtures
Low voltage recessed down light
1-50 Watt Bipin MR16 Halogen Bulb (included)
Cannot be installed without lights
Uses 120 Volt electricity
ENERGY STAR Qualified
Lifetime Limited Motor Warranty
Cannot Be Flush Mounted
Replacement Glass Options*
Please call to order replacement glass (if you have broken the glass on this fan).
FREE REPLACEMENT GLASS: If you purchased your fan from us in the past 5 years (on or after March 31st 2009) and have broken your glass, we may replace it FREE OF CHARGE based on our 5 Year FREE Replacement Parts Plan. Please call us so that we can verify that you made your purchase from us and that your glass is in fact broken (email us a picture of your fan and broken glass). Once verified, we will get you a replacement at no charge (just another advantage of buying your ceiling fans here at Hansen Wholesale). *All replacement glass sales are final, no refunds or exchages.
This ceiling fan can be installed on ceilings that are 8 or 9 feet high and can be angled up to 30 degrees without the need for any additional
mounting hardware, so what is in the box will be sufficient. If you have a high ceiling or vaulted ceiling that is angled more than 30 degrees (or both),
you may need a downrod or angled ceiling adapter in order to install your fan.
Minimum Ceiling Height Requirement: This fan requires a minimum ceiling height of at least 105" in order to meet building codes. If your ceiling is lower than 105" then you may need to add a flushmount adapter or close to ceiling dowrod if one is available for the fan (see below).
If you cannot find what you need to make this fan work in your room, please give us a call so we can check to see if there are any further alternatives.
Note: This fan includes 10" downrods(s)
Angled Ceilings: We do not currently have any specific information regarding an angled ceiling adapter for this fan. If you have an angled ceiling, please call for details.
How long of a downrod do I need?
Building codes require ceiling fans to be installed with the blades no lower than 7 feet from the floor in residential applications (industrial fans may require more distnace). The closer you are to the fan blades, the more cooling effect you will feel, so 7 feet is the optimal distance from the floor for most residential ceiling fans to get the most benefit.
The downrod included with the Matthews Fan Co. Atlas Acqua Rotational Metal ceiling fan is 10", which puts the blades 21" from the ceiling. Here are the Minimum Ceiling Heights required for each downrod available for this fan. Each length will put the fan blades 7 feet from the floor, so if you want your fan blades higher than 7 feet, choose a shorter downrod to fit your needs.
This fan will hange from flat ceilings and ceilings angled up to 30 degrees using the hardware that comes in the box. If your ceiling is over 30 degrees, you can by an Angled Ceiling Adapter that will allow you to install the fan on a ceiling angled up to 45.
Ceiling Angle Calculator
How to measure Rise:
Rise is the vertical distance your ceiling rises for every horizontal foot. Rise per foot is called Pitch. A roof with a 4/12 pitch rises 4 inches vertically for every 12 inches horizontal.
Our calculator uses roof pitch to calculate the angle of your ceiling. Since we already know the horizontal measurement is 12", we only need you to enter in the vertical rise to make the calculation.
To measure the rise of your ceiling: Hold a 12" ruler ruler horizontally (using a level) with one corner touching the ceiling. Then take measure the vertical distance from the other end of the ruler to the ceiling. This is the rise. Select your dimensions in the form above to calculate the angle of your ceiling. Most ceiling fans (except for hugger fans) can hang on ceilings angled up to 30 degrees without
the need for an angled ceiling adapter. 30 degrees is slightly less than a 7/12 pitch. Most angled ceiling adapters will allow your fan to hang up to 45 degress...which is a 12/12 pitch.
The Matthews Fan Co. Atlas Acqua Rotational Metal is UL Listed for Outdoor Damp Locations, which means the fan is rated for indoor or outoor use in covered areas where there is excessive moisture, but not direct exposure to rain or sprinklers. It's great for fully covered patios and porches or screened enclosures. All outdoor ceiling fans can also be installed inside your house, so they are also great for bathrooms and laundry rooms or any other room inside your home.
How does the Matthews Fan Co. Atlas Acqua Rotational Metal Compare to the Average Ceiling Fan?
Ceiling Fan Comparison Graph
Breeze Rating: 5.5 (5 is best)
Wind Speed Factor: 4.06 MPH
Graph represents 37" blade span How to read our graphs
Quality Rating = 4 (average is 3)
A Quality Rating of 4 is above average, the Matthews Fan Co. Atlas Acqua Rotational Metal ceiling fan will run smooth and quiet and will give you many years of operation with no worries of the motor burning out.
Wind Speed Factor: 4.06 MPH (average is about 3)
A Wind Speed Factor of 4.06 MPH gives this fan a Breeze Rating of 5.5 out of 5.
This is over the top when it comes to wind speed, so this fan provides about the strongest breeze you can get from a ceiling fan, making it one of the best fans you can buy to cool you off!
Aside from Quality, which accounts for smooth quiet operation and durability, the amount of wind-chill a fan can provide to cool you off is the most important consideration.
Afterall, why do want a ceiling fan in the first place?
Airflow = 3949 CFM (average is about 5,000)
3949 CFM far less than the average ceiling fan, so don't expect to feel much of a breeze from this fan unless you are are directly beneath it. We only recommended the Matthews Fan Co. Atlas Acqua Rotational Metal for small rooms or areas where very little airflow is needed. This fan may not allow you to raise your thermostat, so do not expect to save much on your cooling bills (if you have AC).
Efficiency Rating = 44 CFM/Watt (average is about 86)
An Efficiency Rating of 44 is
Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of
electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more
CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if
you expect to operate several ceiling fans at the same time. (see calculator below)
Electrical Usage = 89 Watts (average is about 76)
89 Watts per hour is
higher than average, so the Matthews Fan Co. Atlas Acqua Rotational Metal costs a little more to operate than other fans.
Use the calculator below to estimate just how much it will cost to operate this fan in "Your home".
Wind Speed Factor -vs- Efficiency: Wind Speed is KING! Ceiling fans can save you a lot on your energy bills if you use them properly to reduce your use of central air.
Ceiling fans cool you off by creating a wind-chill effect, so the more wind speed a fan generates, the cooler it will make you feel. The cooler your ceiling fan can make you feel, the higher you can raise your AC thermostat to conserve energy without sacrificing your level of comfort. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills, but you cannot raise your thermostat by 10 degrees if you focus only on ceiling fans that use less energy rather than ones that generate higher wind speed. To put this in perspective: A typical central air system uses about 3500 Watts when it is running, so if a ceiling fan that uses 100 watts allows you to raise your thermostat a couple degrees higher than a more "efficient" fan that uses only 50 watts, the savings you will get by raising your AC therestat a couple degrees higher is far more than the difference of 50 watts between the two fans. With that said, a ceiling fan that uses less watts yet produces higher wind speed is a win-win.
Basic Help: Our operational cost calculator estimates how much it will cost to operate the Matthews Fan Co. Atlas Acqua Rotational Metal ceiling fan. By default, the calculator assumes that you will leave your fan running 24 hours a day for the entire year (which is not very likely to be accurate), so you will want to change the hours and days to be more in line with how often you think you will use the fan. The calculator also defaults to the average cost per kWh of electricity in the USA. You can change this to use the average cost of electricity in your state, although this may vary widely from city to city. For the most accurate calculation, manually enter the actual cost/kWh shown on your utility bill.
The wattage of the fan is already included (if it is known), but you can change it if you wish to see how the wattage affects the cost.
Fans with lights: Calculations are performed without lights by default. If you add a light fixture to the fan, you can add the wattage of the fixture to the wattage of the fan to perform calculations with the lights on. In some cases, when a light fixture of known wattage is included with the fan, the option to calculate with or without lights will show automatically. The light fixture on a ceiling fan almost always uses substantially more electricity than the fan motor, so it is very important to take that into account when comparing the overall operational cost between various ceiling fans
CFM -vs- Efficiency: CFM is KING! It is more important to buy a fan with higher CFMs than it is to buy a fan that uses less electricity. The highest wattage consumed by the most energy guzzling ceiling fan on our website is about 120 watts. So if you input 120 as the fan watts and run our calculator, you will see that it still costs less than 2 cents per hour to operate the most energy guzzling ceiling fan in most states.
You will get more savings with a higher CFM fan than a lower Wattage fan because if your fan moves more air
you will be able to raise your thermostat to a higher degree. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills. Choosing a less powerful fan because it uses less electricity can be the worst mistake you can make because it will not cool you off enough to allow you to raise your thermostat to a high enough level without becoming uncomfortable. This is why CFM is so much more important to consider than Wattage.
When comparing fans of different sizes with varying CFMs, it is important to consider the wind speed in order to know which fans will make you feel cooler. Read more about Ceiling Fan Wind Speed here!
The average kWh by state used by our calculator is derived from information published by the
US Government Department of Energy as of May 2009.
Your actual cost may differ from this. Again, refer to your utility bill for your most recent kWh cost.
Note: The formula for calculating wind speed was revised on 1/31/2015. The previous formula did not take into account that the testing chamber (cylinder) used to determine the CFM of a fan is 8" in diameter larger than the blade span. The revised formula ads 8" to the fan diameter to account for this. The wind speed results are now slightly lower than previosly stated
"When it comes to ceiling fan size...the largest fan with the highest wind speed that will look fine in the area is the best choice!"
Ceiling fans cool you off by creating a wind-chill effect, the degree of which is determined by the wind speed produced by the fan; the higher the wind speed, the cooler you feel. It is critical to know the following; CFM is not the same as wind speed; the wind chill effect you feel from a ceiling fan is concentrated in the column of air directly beneath the fan blades; the wind chill drops off dramatically just a foot or two outside that area.
Ceiling fan manufacturers are required by the DOE to publish the airflow of each fan in CFM (Cubic Feet per Minute) which is not the same as wind speed. CFM is the volume of air being moved every minute, whereas wind speed how fast the air is moving in MPH (Miles per Hour) or LFM (Linear Feet per Minute), both of which are directly related to the amount of wind chill effect. When you compare two fans that are different sizes yet have the same CFM you will find they produce quite different wind speeds. The smaller fan must move air faster in order to move the same amount of air per minute (CFM) as the larger fan. The airflow generated by the smaller creates more wind chill because it is more concentrated and has a higher wind speed. The larger fan of equal CFM moves air over a larger area so it is less concentrated at a lower wind speed. So when determining what size fan to buy you must consider the amount of space a fan will cover (the diameter of the fan plus a foot or two), the intensity of the airflow directly beneath the fan (the wind speed) balanced with how any particular size fan will look or fit in the space. Ultimately the largest fan with the highest wind speed that will look fine in the area is the best choice for performance.
The required testing method for ceiling fans is not done in a way that translates well to real world applications, so the CFM data can be somewhat deceiving if you do not know how to interpret it.
The current required test procedure (shown left) shows a ceiling fan hanging above a 3 foot tall metal cylinder that is 8 inches wider than the ceiling fan (blade span) and stands 4 feet above the floor. Sensors are located at the bottom of the cylinder to measure the wind speed. The wind speed is then converted into CFM (Cubic Feet per Minute). Although this testing procedure can be valuable for comparing the performance of fans equal in size, it does not emulate a real application inside a home and does not make it easy to compare fans that are different sizes in order to determine the best size fan(s) for any particular application.
Therefore, the best way to compare the actual performance between fans of various sizes is to compare the wind speed. The wind speed of a ceiling fan can be mathematically calculated based on the CFM and Blade Span. Here is a comparison where we performed the calculations between 3 fans of different blade spans and CFMs. The largest fan has the highest CFM yet the smallest fan produces the highest wind speed.
84" Fan with CFM of 10000 produces wind speed of 2.46 MPH (216.62 LFM)
52" Fan with CFM of 6500 produces wind speed of 3.76 MPH (331.04 LFM )
The above example shows how deceiving CFM data can be. Even though the 52" fan moves 35% less air than the 84" fan, the intensity of the breeze that produces a wind-chill effect is over 50% more than that of the larger fan and will make you feel much cooler if you are directly beneath it. So, to cover a larger area, two or more smaller fans with good performance may be a better choice than a single large higher CFM fan.
Only 20 Left!
Ships in 4 to 7 Buisiness Days
(direct from manufacturer)
This fan has been discontinued and is no longer in production. It is being sold at a special reduced price and is NON-RETURNABLE/NON-REFUNDABLE.
Our inventory indicates there are only 20 left as of last night.
This is like FREE INSURANCE for your ceiling fan. If you break a blade, glass or remote control, we'll replace it FREE!
It happens more often than you know and some replacement parts can cost over $100!
This Plan gives you the ultimate protection beyond the factory warranty!
This plan covers things that are not normally covered by the manufacturers warranty. These are actually the most common problems that people have with
ceiling fans, which is most likely why the manufacturers don't want to cover them. Here they are:
1. Broken Glass
2. Broken Blades
3. Broken Blade Holders
4. Remote Controls (this is a big one)
We are proud to say that we will replace any of these at NO COST to you within the first 5 years after your purchase
based on our Replacement Parts Plan!
And YES...we are referring to cases where you are trying to clean the glass and you accidentally drop it, or you are sweeping the floor and you accidentally
hit your fan with a broom handle and break a blade. This is a very lenient policy, but there are some limitations,
so please read the details here!
If you've seen a better price online, give us a chance to match or beat it!
We realize that getting the lowest price is not always the only important factor in your buying decision, but it is increasingly more important in today's tough
economic times. So, we do offer to match or beat competitors prices whenever possible with our Lowest Price Guarantee!
To Match or Beat a Price Call: 1-800-201-1193
Finding a place that provices great service is equally important, but more difficult to accomplish without interacting with someone.
Although the Internet makes it easy to compare prices, it does little to ensure you are going to get good service. Ultimately, our goal is to offer you both the
Best Price and the Best Service, a claim that most companies make but few can live up to.
If you are like most consumers, claims regarding great customer service are empty words until proven otherwise. So, initially, you begin searching for the site with the
lowest price because it is so easy to compare prices online. But prices are fickle. They can change from site to site at any given moment, whereas
customer service typically remains constant. Either a site offers great service or it doesn't.
We are not hiding anything here. We know that the prices we have on our website may or may not be lowest you can find at any given moment. However, if you call us,
we have the distinct advantage of being able to make price adjustments when possible.
The bottom line is, if you have found a better price on this item, please give us a call.
We will appreciate being given the opportunity to match or beat it if possible and, in the process, give you a chance to experience our excellent customer service!
Find a better price even after you buy your fan and we'll refund the difference!
Don't worry, if you find this exact same for less after you make your purchase!
Our Low Price Guarantee not only applies to the time at which you purchase your fan. If you EVER find a better price after you purchase this fan from us,
we will REFUND THE DIFFERENCE based on our Price Guarantee Guidelines!
The one thing that we are most proud of and sets us aside from our competition is our professional customer service. After being in the ceiling fan business for
over 30 years, we have learned many valuable lessons and certainly gained a level of expertese not shared by many.
However, knowledge is one thing...customer satisfaction is another.
We know that the main reason we have survived all of these years is because of our dedication to making
sure every one of our customers has a great experience dealing with us. This is not something we had to learn, it is just what we have always done.
Google officially launched in 1998 while we launched our very first website 4 years earlier back in 1994.
We are in fact the first and oldest ceiling fan supplier on the Internet.
Matthews Fan Co. AQ-CR-MTL Specs
Our Part Number
Acqua-Polished Chrome-Metal Blades
Item Description: 38" Dual Rotational Ceiling Fan with integrated light kit, 3-speed hand-held remote control and damp location protective coating on all finishes with metal blades.
Motor Type AC/DC
2-5 Business days if in stock non season
Normally in Stock
16" plus Downrod
5", 10", 20", 30", 48", 72"
120 V Safety Rating
Country of Origin
Shipping Dimensions 2
Shipping Dimensions 3
**Light Fixture Note
Important Note: Due to government legislation regarding the efficiency and wattage ceiling fan light fixtures (EPACT 2005) the fixture you receive may use a different bulb than
what is described. This is because most manufacturers have rolling changes in their inventory in order to bring their fixtures into compliance, so there is no way to know which fixture the manufacturer
will ship until all of their old inventory has been depleted. Most fixtures that used Medium Base Bulbs in the past will be changed to use Candelabra Base Bulbs. Also, since the legislation mandates
that the total wattage of a ceiling fan light cannot exceed 190Watts, the maximium wattage of the bulbs may be lowered to meet this criteria and will most likely have a limiting fuse designed to
trigger if you use bulbs that exceed this wattage.
Add this item to your Website or Blog!
Copy and paste the above code onto your webpage (uses embeded iFrame)