How does the Emerson Premium Factory Closeout Compare to the Average Ceiling Fan?
Wind Speed: 4.66 MPH (410.33 LFM)
(Graph represents 50" blade span)
Quality Rating = 5 (average is 3)
With a Quality Rating of 5, the Emerson Premium Factory Closeout is among the finest quality ceiling fans made. It will run smooth and quiet without wobbling or making noise and you can let it run
24 hours a day for years on end without any worries of the motor burning out.
Note: CFM and Wind Speed are calculated using standard shaped 50" blades. The size and shape of the blades will alter the performance dramatically. For example: Palm style and carved wood leaf shaped blades can reduce performance by as much as 50%!
Airflow = 5595 CFM | Wind Speed = 4.66 MPH.
5595 CFM is pretty much average, so don't expect a super strong breeze from this fan. However, most people are used to average ceiling fans, so if you have never experienced a fan more powerful than this, you may be satisfied with the Emerson Premium Factory Closeout.
The 4.66 MPH wind speed is a little lower than you might expect with such a high airflow. The wind speed tells you how much breeze you can expect to feel when you are beneath the fan. Due to the blade span of this fan, the actual concentration of airflow is spread over a larger area, so the ultimate cooling effect is a little less than some fans with smaller blade spans. This is a compromise that you may be willing to accept if the actual area where you spend your time is further away from the center of the fan, which is why you may consider a larger fan such as this one. In this case the Emerson Premium Factory Closeout will allow you to raise your thermostat by 1 or 2 degrees, which will still help you save additional money on your cooling bills (if you have AC).
Efficiency Rating = 56 CFM/Watt (average is about 86)
An Efficiency Rating of 56 is
Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of
electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more
CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if
you expect to operate several ceiling fans at the same time. (see calculator below)
Electrical Usage = 100 Watts (average is about 76)
100 Watts per hour is
higher than average, so the Emerson Premium Factory Closeout costs a little more to operate than other fans.
Use the calculator below to estimate just how much it will cost to operate this fan in "Your home".
CFM -vs- Efficiency: CFM is KING! It is more important to buy a fan with higher CFMs than it is to buy a fan that uses less electricity. The highest wattage consumed by the most energy guzzling ceiling fan on our website is about 120 watts. So if you input 120 as the fan watts and run our calculator, you will see that it still costs less than 2 cents per hour to operate the most energy guzzling ceiling fan in most states.
You will get more savings with a higher CFM fan than a lower Wattage fan because if your fan moves more air
you will be able to raise your thermostat to a higher degree. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills. Choosing a less powerful fan because it uses less electricity can be the worst mistake you can make because it will not cool you off enough to allow you to raise your thermostat to a high enough level without becoming uncomfortable. This is why CFM is so much more important to consider than Wattage.