This Item is VIP Guaranteed!Don't like it once you get it? Don't Worry... We'll take it back within 90 Days and give you a FULL Refund! (No Restocking Fee - No Hassle)
We are so confident that the quality and appearance of this item will "Exceed" your expectations that if for any reason you do not like it once you open the box and see it,
we will take it back and give you a 100% refund with NO Restocking Fee within 90 days of your purchase!
Shown in picture: Fanimation Arden (Pedestal Fan) Model FP8014OB in Oil-Rubbed Bronze. Oiled Bronze finished blades are included as shown. Comes with 3-Speed rotary switch with off position.
The Arden is a free-standing high power oscillatiing fan with unique styling. Available in oil-rubbed bronze or satin nickel, this attractive pedestal fan comes with a tripod that has walnut finished legs. The fan comes with a 3-speed rotary switch and 8 foot power cord and has a 50 degree total oscillation. Rated for use in dry locations only.
(Building codes require blades to be at least 7' from the floor)
FTC Energy Information Label
This label is required by the FTC to be published by any company selling this fan on the Internet.
ENERGY INFORMATION at High Speed
Cubic Feet Per Minute
Watts (excludes lights)
Airflow Efficiency Unknown
Cubic Feet Per Minute Per Watt
36" to 48"
ceiling fans have airflow efficiencies ranging from approximately
71 to 86
cubic feet per minute per watt at high speed.
Money-Saving Tip: turn off fan when leaving room
Included Control (Rotary): 3-Speed rotary switch with off position.
Low, High or Vaulted Ceiling Installation Options
This ceiling fan can be installed on ceilings that are 8 or 9 feet high and can be angled up to 30 degrees without the need for any additional
mounting hardware, so what is in the box will be sufficient. If you have a high ceiling or vaulted ceiling that is angled more than 30 degrees (or both),
you may need a downrod or angled ceiling adapter in order to install your fan.
Minimum Ceiling Height Requirement: This fan requires a minimum ceiling height of at least 84" in order to meet building codes. If your ceiling is lower than 84" then you may need to add a flushmount adapter or close to ceiling dowrod if one is available for the fan (see below).
If you cannot find what you need to make this fan work in your room, please give us a call so we can check to see if there are any further alternatives.
Angled Ceilings: We do not currently have any specific information regarding an angled ceiling adapter for this fan. If you have an angled ceiling, please call for details.
How long of a downrod do I need?
Building codes require ceiling fans to be installed with the blades no lower than 7 feet from the floor in residential applications (industrial fans may require more distnace). The closer you are to the fan blades, the more cooling effect you will feel, so 7 feet is the optimal distance from the floor for most residential ceiling fans to get the most benefit.
To calculate the length of downrod that you need to get as close to 7 feet from the floor as possible (but not lower), first you must look at the dimensions of the fan to determine how far from the ceiling the blades will hang using the standard mounting hardware. In most cases, the hardware that a ceiling fan ships with is all you need for an 8 or 9 foot high ceiling...but be sure to double check the distance a fan hangs from the ceiling because some fans hang down more than 18" and will require at least a 9 or 10 foot ceiling.
Once you know how far the fan hangs with the standard mounting hardware you can calculate how far it will hang with a longer downrod by subtracting the length of the standard downrod from the length of a longer downrod. Add that length to the distance the fan normally hangs from the ceiling to determine how far down your fan will hang with any particular downrod length. If you do not know the length of the downrod that is included with you can figure that 4" is about average.
If none of the dimensions you need to make your calculation are not shown on our website, then please call us to have someone help you choose the correct downrod.
Here is an example of the calculation:
If a fan comes with a standard 4 1/2" downrod, a 12" downrod would make the fan hang 12" - 4 1/2" further from the ceiling...or 7 1/2" further. So if the fan normally hangs 12" from the ceiling with a 4 1/2" downrod, it would hang 17 1/2" (12" + 7 1/2") from the ceiling. So if you want the fan to hang as close to 84" from the floor, then do the math to calculate the longest downrod you can use to get closest to 84" without going past 84".
This fan will hange from flat ceilings and ceilings angled up to 30 degrees using the hardware that comes in the box. If your ceiling is over 30 degrees, you can by an Angled Ceiling Adapter that will allow you to install the fan on a ceiling angled up to 45.
Ceiling Angle Calculator
How to measure Rise:
Rise is the vertical distance your ceiling rises for every horizontal foot. Rise per foot is called Pitch. A roof with a 4/12 pitch rises 4 inches vertically for every 12 inches horizontal.
Our calculator uses roof pitch to calculate the angle of your ceiling. Since we already know the horizontal measurement is 12", we only need you to enter in the vertical rise to make the calculation.
To measure the rise of your ceiling: Hold a 12" ruler ruler horizontally (using a level) with one corner touching the ceiling. Then take measure the vertical distance from the other end of the ruler to the ceiling. This is the rise. Select your dimensions in the form above to calculate the angle of your ceiling. Most ceiling fans (except for hugger fans) can hang on ceilings angled up to 30 degrees without
the need for an angled ceiling adapter. 30 degrees is slightly less than a 7/12 pitch. Most angled ceiling adapters will allow your fan to hang up to 45 degress...which is a 12/12 pitch.
The Fanimation Arden is UL Listed for Indoor use only, so it is not designed to be exposed to moisture or harsh elements. Do not install this fan outside your house. It is also not recommended
for bathrooms that have a shower or tub or laundry rooms, both of which produce excessive amounts of moisture.
Features & Specifications
EPA Efficiency (CFMs/Watt)
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing.
Features & Specifications
74mm x 18mm Motor
5 out of 5 (5 is best)
degree blade pitch
14.53" Cage blade span
Oiled Bronze finished blades (included)
910 to 1310 RPM
UL Listed for use indoors
Cannot be used outdoors
Can Lights be Added?
Accepts Universal Light Kits
Uses 120 Volt electricity
ENERGY STAR Qualified
Lifetime Limited Motor Warranty
Cannot be flush mounted
How does the Fanimation Arden Compare to the Average Ceiling Fan?
Quality Rating = 5 (average is 3)
With a Quality Rating of 5, the Fanimation Arden is among the finest quality ceiling fans made. It will run smooth and quiet without wobbling or making noise and you can let it run
24 hours a day for years on end without any worries of the motor burning out.
As an Internet seller for over 20 years, we know how important a return policy is to you when shopping online. So as of 11/22/2014,
we now have NO time restrictions and NO restocking fees for qualified items that are returned to us in unused resalable condition.
For more details about this incredibly generous new return policy, please read our: Terms and Conditions
This is like FREE INSURANCE for your ceiling fan. If you break a blade, glass or remote control, we'll replace it FREE!
It happens more often than you know and some replacement parts can cost over $100!
This Plan gives you the ultimate protection beyond the factory warranty!
This plan covers things that are not normally covered by the manufacturers warranty. These are actually the most common problems that people have with
ceiling fans, which is most likely why the manufacturers don't want to cover them. Here they are:
1. Broken Glass
2. Broken Blades
3. Broken Blade Holders
4. Remote Controls (this is a big one)
We are proud to say that we will replace any of these at NO COST to you within the first 5 years after your purchase
based on our Replacement Parts Plan!
And YES...we are referring to cases where you are trying to clean the glass and you accidentally drop it, or you are sweeping the floor and you accidentally
hit your fan with a broom handle and break a blade. This is a very lenient policy, but there are some limitations,
so please read the details here!
If you've seen a better price online, give us a chance to match or beat it!
We realize that getting the lowest price is not always the only important factor in your buying decision, but it is increasingly more important in today's tough
economic times. So, we do offer to match or beat competitors prices whenever possible with our Lowest Price Guarantee!
To Match or Beat a Price Call: 1-800-201-1193
Finding a place that provices great service is equally important, but more difficult to accomplish without interacting with someone.
Although the Internet makes it easy to compare prices, it does little to ensure you are going to get good service. Ultimately, our goal is to offer you both the
Best Price and the Best Service, a claim that most companies make but few can live up to.
If you are like most consumers, claims regarding great customer service are empty words until proven otherwise. So, initially, you begin searching for the site with the
lowest price because it is so easy to compare prices online. But prices are fickle. They can change from site to site at any given moment, whereas
customer service typically remains constant. Either a site offers great service or it doesn't.
We are not hiding anything here. We know that the prices we have on our website may or may not be lowest you can find at any given moment. However, if you call us,
we have the distinct advantage of being able to make price adjustments when possible.
The bottom line is, if you have found a better price on this item, please give us a call.
We will appreciate being given the opportunity to match or beat it if possible and, in the process, give you a chance to experience our excellent customer service!
Find a better price even after you buy your fan and we'll refund the difference!
Don't worry, if you find this exact same for less after you make your purchase!
Our Low Price Guarantee not only applies to the time at which you purchase your fan. If you EVER find a better price after you purchase this fan from us,
we will REFUND THE DIFFERENCE based on our Price Guarantee Guidelines!
The one thing that we are most proud of and sets us aside from our competition is our professional customer service. After being in the ceiling fan business for
over 30 years, we have learned many valuable lessons and certainly gained a level of expertese not shared by many.
However, knowledge is one thing...customer satisfaction is another.
We know that the main reason we have survived all of these years is because of our dedication to making
sure every one of our customers has a great experience dealing with us. This is not something we had to learn, it is just what we have always done.
Google officially launched in 1998 while we launched our very first website 4 years earlier back in 1994.
We are in fact the first and oldest ceiling fan supplier on the Internet.
Availability & Lead Time
In Stock Ships direct from Manufacturers Warehouse
SHIPS IN 24 TO 48 Hrs (weekdays)! Call 1-800-201-1193 for FASTER shipping
Fanimation FP8014OB Specs
Our Part Number
Description: The Arden by Fanimation performs double duty, combining functionality with aesthetics. The Walnut legs and the fan’s Oil Rubbed Bronze finish recall the clean and classic lines of an architect’s tripod, dovetailing nicely with transitional as well as classic décor. The Arden stands just under 44 inches high (including grill). A three-speed rotary switch provides a trio of comfort levels. All Fanimation motors are protected by a limited lifetime warranty.
ARDEN PEDESTAL FAN: OIL RUBBED BRONZE
Product Length (INCHES)
Remote Included y/n
Wall control included y/n
Energy Star Rated
Country of Origin
Carton Weight (lbs)
Add this item to your Website or Blog!
Copy and paste the above code onto your webpage (uses embeded iFrame)