This Item is VIP Guaranteed!Don't like it once you get it? Don't Worry... We'll take it back within 90 Days and give you a FULL Refund! (No Restocking Fee - No Hassle)
We are so confident that the quality and appearance of this item will "Exceed" your expectations that if for any reason you do not like it once you open the box and see it,
we will take it back and give you a 100% refund with NO Restocking Fee within 90 days of your purchase!
Shown in picture: Fanimation Old Havana Ceiling Mount Ceiling Fan Model FPH210AC in Antique Copper. finished blades are included as shown. Comes with 3-Speed non-reversing rotary control attached to back of Havana fans.. Also shown with optional FA-FPH81BL1 Old Havana Ceiling Mount (1" Dr) Black (sold separately) accessory.
The Old Havana Ceiling Mount fan is part of Fanimations Ernest Hemingway collection- which truly brings back the look and feel of quality that was established in days gone by when things were handcrafted with pride. Not only are these fans highly functional- they will add a distinct stylish flare in any application where they are used either indoors on outdoors in covered areas (damp rated if purchased in black or rust).
This ceiling fan can be installed on ceilings that are 8 or 9 feet high and can be angled up to 30 degrees without the need for any additional
mounting hardware, so what is in the box will be sufficient. If you have a high ceiling or vaulted ceiling that is angled more than 30 degrees (or both),
you may need a downrod or angled ceiling adapter in order to install your fan.
Minimum Ceiling Height Requirement: This fan requires a minimum ceiling height of at least 84" in order to meet building codes. If your ceiling is lower than 84" then you may need to add a flushmount adapter or close to ceiling dowrod if one is available for the fan (see below).
If you cannot find what you need to make this fan work in your room, please give us a call so we can check to see if there are any further alternatives.
Angled Ceiling Kit - Required for ceilings angled more than 30 and up to 45 degrees. Not needed for ceilings angled 30 degrees or less (or flat). Ceilings angled more than 45 will require a box framed into the ceiling to flatten the surface where the fan is to be installed.
Building codes require ceiling fans to be installed with the blades no lower than 7 feet from the floor in residential applications (industrial fans may require more distnace). The closer you are to the fan blades, the more cooling effect you will feel, so 7 feet is the optimal distance from the floor for most residential ceiling fans to get the most benefit.
To calculate the length of downrod that you need to get as close to 7 feet from the floor as possible (but not lower), first you must look at the dimensions of the fan to determine how far from the ceiling the blades will hang using the standard mounting hardware. In most cases, the hardware that a ceiling fan ships with is all you need for an 8 or 9 foot high ceiling...but be sure to double check the distance a fan hangs from the ceiling because some fans hang down more than 18" and will require at least a 9 or 10 foot ceiling.
Once you know how far the fan hangs with the standard mounting hardware you can calculate how far it will hang with a longer downrod by subtracting the length of the standard downrod from the length of a longer downrod. Add that length to the distance the fan normally hangs from the ceiling to determine how far down your fan will hang with any particular downrod length. If you do not know the length of the downrod that is included with you can figure that 4" is about average.
If none of the dimensions you need to make your calculation are not shown on our website, then please call us to have someone help you choose the correct downrod.
Here is an example of the calculation:
If a fan comes with a standard 4 1/2" downrod, a 12" downrod would make the fan hang 12" - 4 1/2" further from the ceiling...or 7 1/2" further. So if the fan normally hangs 12" from the ceiling with a 4 1/2" downrod, it would hang 17 1/2" (12" + 7 1/2") from the ceiling. So if you want the fan to hang as close to 84" from the floor, then do the math to calculate the longest downrod you can use to get closest to 84" without going past 84".
This fan will hange from flat ceilings and ceilings angled up to 30 degrees using the hardware that comes in the box. If your ceiling is over 30 degrees, you can by an Angled Ceiling Adapter that will allow you to install the fan on a ceiling angled up to 45.
Ceiling Angle Calculator
How to measure Rise:
Rise is the vertical distance your ceiling rises for every horizontal foot. Rise per foot is called Pitch. A roof with a 4/12 pitch rises 4 inches vertically for every 12 inches horizontal.
Our calculator uses roof pitch to calculate the angle of your ceiling. Since we already know the horizontal measurement is 12", we only need you to enter in the vertical rise to make the calculation.
To measure the rise of your ceiling: Hold a 12" ruler ruler horizontally (using a level) with one corner touching the ceiling. Then take measure the vertical distance from the other end of the ruler to the ceiling. This is the rise. Select your dimensions in the form above to calculate the angle of your ceiling. Most ceiling fans (except for hugger fans) can hang on ceilings angled up to 30 degrees without
the need for an angled ceiling adapter. 30 degrees is slightly less than a 7/12 pitch. Most angled ceiling adapters will allow your fan to hang up to 45 degress...which is a 12/12 pitch.
The Fanimation Old Havana Ceiling Mount is UL Listed for Indoor use only, so it is not designed to be exposed to moisture or harsh elements. Do not install this fan outside your house. It is also not recommended
for bathrooms that have a shower or tub or laundry rooms, both of which produce excessive amounts of moisture.
Quality Rating = 5 (average is 3)
With a Quality Rating of 5, the Fanimation Old Havana Ceiling Mount is among the finest quality ceiling fans made. It will run smooth and quiet without wobbling or making noise and you can let it run
24 hours a day for years on end without any worries of the motor burning out.
This is like FREE INSURANCE for your ceiling fan. If you break a blade, glass or remote control, we'll replace it FREE!
It happens more often than you know and some replacement parts can cost over $100!
This Plan gives you the ultimate protection beyond the factory warranty!
This plan covers things that are not normally covered by the manufacturers warranty. These are actually the most common problems that people have with
ceiling fans, which is most likely why the manufacturers don't want to cover them. Here they are:
1. Broken Glass
2. Broken Blades
3. Broken Blade Holders
4. Remote Controls (this is a big one)
We are proud to say that we will replace any of these at NO COST to you within the first 5 years after your purchase
based on our Replacement Parts Plan!
And YES...we are referring to cases where you are trying to clean the glass and you accidentally drop it, or you are sweeping the floor and you accidentally
hit your fan with a broom handle and break a blade. This is a very lenient policy, but there are some limitations,
so please read the details here!
If you've seen a better price online, give us a chance to match or beat it!
We realize that getting the lowest price is not always the only important factor in your buying decision, but it is increasingly more important in today's tough
economic times. So, we do offer to match or beat competitors prices whenever possible with our Lowest Price Guarantee!
To Match or Beat a Price Call: 1-800-201-1193
Finding a place that provices great service is equally important, but more difficult to accomplish without interacting with someone.
Although the Internet makes it easy to compare prices, it does little to ensure you are going to get good service. Ultimately, our goal is to offer you both the
Best Price and the Best Service, a claim that most companies make but few can live up to.
If you are like most consumers, claims regarding great customer service are empty words until proven otherwise. So, initially, you begin searching for the site with the
lowest price because it is so easy to compare prices online. But prices are fickle. They can change from site to site at any given moment, whereas
customer service typically remains constant. Either a site offers great service or it doesn't.
We are not hiding anything here. We know that the prices we have on our website may or may not be lowest you can find at any given moment. However, if you call us,
we have the distinct advantage of being able to make price adjustments when possible.
The bottom line is, if you have found a better price on this item, please give us a call.
We will appreciate being given the opportunity to match or beat it if possible and, in the process, give you a chance to experience our excellent customer service!
Find a better price even after you buy your fan and we'll refund the difference!
Don't worry, if you find this exact same for less after you make your purchase!
Our Low Price Guarantee not only applies to the time at which you purchase your fan. If you EVER find a better price after you purchase this fan from us,
we will REFUND THE DIFFERENCE based on our Price Guarantee Guidelines!
The one thing that we are most proud of and sets us aside from our competition is our professional customer service. After being in the ceiling fan business for
over 30 years, we have learned many valuable lessons and certainly gained a level of expertese not shared by many.
However, knowledge is one thing...customer satisfaction is another.
We know that the main reason we have survived all of these years is because of our dedication to making
sure every one of our customers has a great experience dealing with us. This is not something we had to learn, it is just what we have always done.
Yes, we are the ones who developed the very first ceiling fan website back in 1994
and over 10,000,000 visitors have used our site since then while shopping for ceiling fans.
Fanimation FPH210AC Specs
Our Part Number
Description: The strong silhouette and intricate details of the Old Havana epitomize Old World class and sophistication. The Old Havana has an antique style that is reminiscent of a time when people relied solely on fans to stay cool. Although the Old Havana’s historic look would make its pre-air conditioning predecessors proud, its modern engineering allows this fan to operate on three speeds in both dry and damp locations. The Old Havana has several mounting options which include a black pedestal base, black floor/desk mount and a black ceiling mount. The Old Havana is available in antique copper with black and pewter finish for dry locations and black and rust finish for damp locations.
QUESTION: We have a porch with 9' ceilings. If we position the fan vertically as pictured, what will be the clearance from the floor?
ANSWER: The bottom of the fan will be 31" from the ceiling, which would put it at 78" from the floor (about 6 1/2 feet). Positioning the fan head parallel to the floor raises the height by 4", which would place the fan at 82" from the floor. Although the specification sheet from Fanimation only shows the height with the fan positioned parallel, here is a link to it for your perusal anyway:
QUESTION: Will these fans tilt at all or do they just hang straight down? I mean the ceiling mount would be stationary but the caged fan itself would angle stightly so that you could position the air to go slightly down instead of just straight across.
ANSWER: You can tilt them however you wish when they are installed...any angle from vertical to horizontal.
QUESTION: so, if we have a teeny kitchen with 8 foot ceilings, would this work without us cutting our heads off? (you know, if it didn't have the cage?) in other words, can this be flush mounted with the 6" rod? if not, are there others out there that are? thanks.
ANSWER: The 27" dimension from the ceiling to the bottom of the fan is measured when the fan is positioned horizontally (not vertically as shown in the picture). So, I would not recommend using the fan on an 8 foot ceiling since it would be 69" from the floor. The only other cage style ceiling fan that I am aware of is also made by Fanimation, but it is a completely different style. The Escalade will hang only 16" from the ceiling with a standard 6" downrod. You can view this fan on our site using this link: Fanimation Escalade at Hansen Wholesale
Also, Fanimation has recently added a new light fixture option to the Escalade which is more dramatic in style which we do not show on our site. You can view this new option at the Fanimation website using this link: Fanimation Escalade at Fanimation Website