Minka Aire Artemis Ceiling Fan
Choose Custom Options & Accessories Here
Shown in Picture: Minka Aire Artemis Ceiling Fan Model F803-RD in High Gloss Red. The light fixture and Artemis High Gloss Red finished blades are included as shown. The light fixture uses 1-100W Mini Can Halogen Bulb (bulbs included).**. A bottom cap is included so you can install the fan with or without the light. Comes with The WCS212 AireControl® Full Function Wall Control featuring 3 speeds in forward and reverse as well as a full range light dimmer. Requires just 2 wires for installation (1 hot wire). This control is also compatible with the optional RCS212 remote control (sold separately), should you decide to operate the fan from a wall control and remote control. The Aretmis is a stunning new contemporary style ceiling fan with a sleek design that includes a low profile built-in light fixture. The high density molded plastic blades completely cover the motor inside creating the illusion that the blades and body are one piece. A truly innovative and striking design.
Webmasters Choice: After being in the fan business for over 25 years, it takes a lot for a ceiling fan to impress me. Although the Minka Aire Artemis has been around for a few years now, it still is one of my favorite fans that looks stunning in real life.
Ceiling Fan Comparison Graph
This graph makes it easy to compare features between fans. Pay particular attention to the "Breeze Rating" and "MPH or Wind Speed Factor" which give you the best idea of how much cooling effect you might expect from this fan.
For questions about our comparison graph read more here
Room Settings Viewer
Included Control (MF-WCS212): The WCS212 AireControl® Full Function Wall Control featuring 3 speeds in forward and reverse as well as a full range light dimmer. Requires just 2 wires for installation (1 hot wire). This control is also compatible with the optional RCS212 remote control (sold separately), should you decide to operate the fan from a wall control and remote control.
(Building codes require blades to be at least 7' from the floor)
*NOTE: Minka Aire measures the blade distance to the TOP of the blade. Please add approximately 1/2" to 1" to estimate the distance to the bottom of the blades.
View Additional Product Details
Click on each tab to below show or hide additional details and resources for this fan...
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing.
|Model Name|| Minka Aire Artemis|
Features & Specifications
|Motor Size|| 188mm x 25mm Motor|
|Quality Rating|| 5 out of 5 (5 is best)|
|Blade Pitch|| Variable degree blade pitch|
|Blade Span|| 58" blade span|
|Blade Qty|| 3 blades|
|Blades Color||Artemis High Gloss Red finished blades (included)|
|RPMs|| 69 to 133 RPM|
|Speeds|| 3 Speeds|
|Reverse Function|| Yes|
|Indoor Rating||UL Listed for use indoors|
Cannot be used outdoors
|Includes Uplight|| No|
|Inludes Downlight|| Yes|
|Downlight Type|| Single Globe Fixtures|
|Downlight Description|| Single globe low profile integrated halogen fixture. Copper Bronze and Distressed Koa models include Amber tinted glass in the box. All other models include Etched Opal glass.|
|Downlight Bulbs|| 1-100W Mini Can Halogen Bulb (bulbs included).|
|Downlight Wattage|| 100 Watts|
Includes bottom cap for installation with or without light fixture
|Voltage||Uses 120 Volt electricity|
|ENERGY STAR Qualified|| No|
|Style Group|| Contemporary|
|Approx. Weight|| 25.51 lb.|
|Warranty|| Lifetime Limited Motor Warranty|
|Included Downrod(s)|| 3 1/2" and 6"|
|Flushmount Capability|| Cannot be flush mounted|
|Leadwire Length|| 80"|
Replacement Glass Options*
||Replacement Glass (etched opal) for Minka Aire Artemis Ceiling Fan Model: F803 - LN / MG / MP / TL / SL / WH / RD / KB
(246 in stock)
||Replacement Glass (tinted opal) for Minka Aire Artemis Ceiling Fan Model: F803-CPBR / F803-DK
(53 in stock)
MULTIPLE GLASS OPTIONS: If there is more than one replacement glass option and the glass is not specifically referenced to the fan finish, please call us to place your order. This may indicate that the manufacturer may have modified the glass since the first production run. In such cases, we must know the Serial Number of your ceiling fan to determine when it was produced in order to get the correct glass. The serial number can usually be found on a label that is on the top of your fan motor. Please call us with that number.
FREE REPLACEMENT GLASS: If you purchased your fan from us in the past 5 years (on or after March 31st 2009) and have broken your glass, we may replace it FREE OF CHARGE based on our 5 Year FREE Replacement Parts Plan. Please call us so that we can verify that you made your purchase from us and that your glass is in fact broken (email us a picture of your fan and broken glass). Once verified, we will get you a replacement at no charge (just another advantage of buying your ceiling fans here at Hansen Wholesale). *All replacement glass sales are final, no refunds or exchages.
(X) Hide This
Other Finishes for this Ceiling Fan
Artemis (with AireControl® Wall Control - 120 Volts)
Other Closely Related Ceiling Fans:
Artemis w/Extra Opal Glass (with AireControl® Wall Control - 120 Volts)
Artemis XL5 (with Full Function Remote Remote Control - 120 Volts)
(X) Hide This
This label is required by the FTC to be published
by any company selling this fan on the Internet.
at High Speed
Cubic Feet Per
Minute Per Watt
49" to 60"
ceiling fans have airflow efficiencies
ranging from approximately
51 to 176
cubic feet per
minute per watt at high speed.
Money-Saving Tip: turn off fan when leaving room
(X) Hide This
Low, High or Vaulted Ceiling Installation Options
Minimum Ceiling Height Requirement: This fan requires a minimum ceiling height of at least 94.875" in order to meet building codes. If your ceiling is lower than 94.875" then you may need to add a flushmount adapter or close to ceiling dowrod if one is available for the fan (see below).
If you cannot find what you need to make this fan work in your room, please give us a call so we can check to see if there are any further alternatives.
Note: This fan includes 3 1/2" and 6" downrods(s)
Indoor and Outdoor Limitations
UL Listed for Indoor use only
The Minka Aire Artemis is UL Listed for Indoor use only, so it is not designed to be exposed to moisture or harsh elements. Do not install this fan outside your house. It is also not recommended
for bathrooms that have a shower or tub or laundry rooms, both of which produce excessive amounts of moisture.
(X) Hide This
How does the Minka Aire Artemis Compare to the Average Ceiling Fan?
Ceiling Fan Comparison Graph
Breeze Rating: 4 (5 is best)
Wind Speed Factor: 3.09 MPH
Graph represents 58" blade span
How to read our graphs
Quality Rating = 5 (average is 3)
With a Quality Rating of 5, the Minka Aire Artemis is among the finest quality ceiling fans made. It will run smooth and quiet without wobbling or making noise and you can let it run
24 hours a day for years on end without any worries of the motor burning out.
Wind Speed Factor: 3.09 MPH (average is about 3)
Airflow = 6453 CFM
A Wind Speed Factor of 3.09 MPH gives this fan a Breeze Rating of 4 out of 5.
This is above average when it comes to ceiling fans, so you can expect to feel a decent amount of cooling breeze, but it is not the best.
Aside from Quality, which accounts for smooth quiet operation and durability, the amount of wind-chill a fan can provide to cool you off is the most important consideration.
Afterall, why do want a ceiling fan in the first place?
(average is about 5,000)
6453 CFM is a good amount of aiflow and is above average. We highly recommend ceiling fans that move at least this amount of air in order to provide enough wind chill effect to keep you cool.
The Minka Aire Artemis will allow you to raise your thermostat by several degrees, which will help you save additional money on your cooling bills (if you have AC).
Efficiency Rating = 68 CFM/Watt (average is about 86)
An Efficiency Rating of 68 is
Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of
electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more
CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if
you expect to operate several ceiling fans at the same time. (see calculator below)
Electrical Usage = 95 Watts (average is about 76)
95 Watts per hour is
higher than average, so the Minka Aire Artemis costs a little more to operate than other fans.
Use the calculator below to estimate just how much it will cost to operate this fan in "Your home".
Wind Speed Factor -vs- Efficiency: Wind Speed is KING! Ceiling fans can save you a lot on your energy bills if you use them properly to reduce your use of central air.
Ceiling fans cool you off by creating a wind-chill effect, so the more wind speed a fan generates, the cooler it will make you feel. The cooler your ceiling fan can make you feel, the higher you can raise your AC thermostat to conserve energy without sacrificing your level of comfort. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills, but you cannot raise your thermostat by 10 degrees if you focus only on ceiling fans that use less energy rather than ones that generate higher wind speed. To put this in perspective: A typical central air system uses about 3500 Watts when it is running, so if a ceiling fan that uses 100 watts allows you to raise your thermostat a couple degrees higher than a more "efficient" fan that uses only 50 watts, the savings you will get by raising your AC therestat a couple degrees higher is far more than the difference of 50 watts between the two fans. With that said, a ceiling fan that uses less watts yet produces higher wind speed is a win-win.
(X) Hide This
(Calculate the wind speed of a ceiling fan by plugging in the CFM and Blade Span above)
Fan Size -vs- Wind Speed -vs- CFM
Note: The formula for calculating wind speed was revised on 1/31/2015. The previous formula did not take into account that the testing chamber (cylinder) used to determine the CFM of a fan is 8" in diameter larger than the blade span. The revised formula ads 8" to the fan diameter to account for this. The wind speed results are now slightly lower than previosly stated
"When it comes to ceiling fan size...the largest fan with the highest wind speed that will look fine in the area is the best choice!"
Ceiling fans cool you off by creating a wind-chill effect, the degree of which is determined by the wind speed produced by the fan; the higher the wind speed, the cooler you feel. It is critical to know the following; CFM is not the same as wind speed; the wind chill effect you feel from a ceiling fan is concentrated in the column of air directly beneath the fan blades; the wind chill drops off dramatically just a foot or two outside that area.
Ceiling fan manufacturers are required by the DOE to publish the airflow of each fan in CFM (Cubic Feet per Minute) which is not the same as wind speed. CFM is the volume of air being moved every minute, whereas wind speed how fast the air is moving in MPH (Miles per Hour) or LFM (Linear Feet per Minute), both of which are directly related to the amount of wind chill effect. When you compare two fans that are different sizes yet have the same CFM you will find they produce quite different wind speeds. The smaller fan must move air faster in order to move the same amount of air per minute (CFM) as the larger fan. The airflow generated by the smaller creates more wind chill because it is more concentrated and has a higher wind speed. The larger fan of equal CFM moves air over a larger area so it is less concentrated at a lower wind speed. So when determining what size fan to buy you must consider the amount of space a fan will cover (the diameter of the fan plus a foot or two), the intensity of the airflow directly beneath the fan (the wind speed) balanced with how any particular size fan will look or fit in the space. Ultimately the largest fan with the highest wind speed that will look fine in the area is the best choice for performance.
The required testing method for ceiling fans is not done in a way that translates well to real world applications, so the CFM data can be somewhat deceiving if you do not know how to interpret it.
The current required test procedure (shown left) shows a ceiling fan hanging above a 3 foot tall metal cylinder that is 8 inches wider than the ceiling fan (blade span) and stands 4 feet above the floor. Sensors are located at the bottom of the cylinder to measure the wind speed. The wind speed is then converted into CFM (Cubic Feet per Minute). Although this testing procedure can be valuable for comparing the performance of fans equal in size, it does not emulate a real application inside a home and does not make it easy to compare fans that are different sizes in order to determine the best size fan(s) for any particular application.
Therefore, the best way to compare the actual performance between fans of various sizes is to compare the wind speed. The wind speed of a ceiling fan can be mathematically calculated based on the CFM and Blade Span. Here is a comparison where we performed the calculations between 3 fans of different blade spans and CFMs. The largest fan has the highest CFM yet the smallest fan produces the highest wind speed.
84" Fan with CFM of 10000 produces wind speed of 2.46 MPH (216.62 LFM)
52" Fan with CFM of 6500 produces wind speed of 3.76 MPH (331.04 LFM )
The above example shows how deceiving CFM data can be. Even though the 52" fan moves 35% less air than the 84" fan, the intensity of the breeze that produces a wind-chill effect is over 50% more than that of the larger fan and will make you feel much cooler if you are directly beneath it. So, to cover a larger area, two or more smaller fans with good performance may be a better choice than a single large higher CFM fan.
(X) Hide This
Included With This Fan (as shown):
in High Gloss Red
|Shipping & Sales Tax:
|Itemized Total Price
Sale Price: $549.95
Availability & Lead Time
Over 50 In Stock!
Ships in 2 to 5 Buisiness Days
(direct from manufacturer)
Minka Aire F803-RD Specs
| Our Part Number||MF-F803-RD|
| Model Name||ARTEMIS CEILING FAN|
| Description||ARTEMIS ceiling fan in red|
| Item Weight||25.51|
| Gross Weight||30.448|
| Bulb Qty||1|
| Bulb Type||T4 (E11) Mini Cand Halogen Frosted|
| Bulb Max Watts||100|
| Bulbs Included||Yes|
| Energy Star||No|
| Finish Category||RED|
| Glass||Etched Opal|
| Downrod Width||0.75|
| Blade Pitch||Variable|
| Light Kit Included||Yes|
| Blade Finish||RED|
| Base Item Number||F803|
| Safety Rating||UL|
| Ships Via||UPS|
**Light Fixture Note
Important Note: Due to government legislation regarding the efficiency and wattage ceiling fan light fixtures (EPACT 2005) the fixture you receive may use a different bulb than
what is described. This is because most manufacturers have rolling changes in their inventory in order to bring their fixtures into compliance, so there is no way to know which fixture the manufacturer
will ship until all of their old inventory has been depleted. Most fixtures that used Medium Base Bulbs in the past will be changed to use Candelabra Base Bulbs. Also, since the legislation mandates
that the total wattage of a ceiling fan light cannot exceed 190Watts, the maximium wattage of the bulbs may be lowered to meet this criteria and will most likely have a limiting fuse designed to
trigger if you use bulbs that exceed this wattage.
Lifestyle Images from Houzz
(use arrows to view slideshow)
(use arrows to view slideshow)