Is Ceiling Fan Blade Pitch Important?...Not any more!
Published by: Greg Tillotson
Webmaster for Hansen Wholesale
While shopping for ceiling fans, it is likely that you will encounter websites and sales people touting how important it is to consider the blade pitch of a ceiling fan before you buy it.
Blade pitch is the angle at which the blades are set relative to parallel to the ground. It is commonly stated that "the steeper the blade pitch, the more air a fan will move"
or "a good fan will have a blade pitch of 14 degrees or more". These common misnomers are often used to entice people to purchase a ceiling fan regardless of how well it actually performs.
Blade pitch alone does not determine the airflow of a ceiling fan, although it is part of the equation. The power of the motor, size and shape (aerodynamics) of the blades, the material the blades
are made of, the RPM at which the blades spin...and the blade pitch are all factors that contribute to airflow. For example, ceiling fans with real palm leaf blades won't move hardly any
air no matter what angle the blades are set at. Buy one of these fans and you may be very disappointed with the airflow even if it boasts a 20 degree blade pitch.
What Really Matters is CFM and Wind Speed!
The EPA now requires all fan manufacturers to publish the airflow rating of their ceiling fans in CFM (Cubic Feet per Minute).
They are also required to publish the energy usage in Watts as well as the efficiency, which is measured as CFM/Watt.
Before this information was available, blade pitch was an important consideration when comparing fans to try and determine if one fan "might" move more air than another,
but without considering the other factors I mentioned, it was not very accurate.
Because the CFM data for ceiling fans is now readily available, blade pitch should not even be part of your consideration,
because you can easily compare the performance between fans with actual airflow ratings. But don't be fooled by the CFM numbers either, because
they can be misleading if you do not also account for the size of a fan. Yes, CFM is a great direct comparison when considering fans of the exact same size,
but when you are trying to decide what size fan is best for your application, CFM alone does not tell the whole story and can be misleading.
What you really need to do is compare Wind Speed
What is the difference between Wind Speed and CFM?
CFM is the measurement of the volume of air being moved in cubic feet per minute, whereas wind speed is the measurement of how fast that air is actually moving in MPH or Linear Feet per Minute.
Wind speed is what actually creates a the wind-chill effect of a ceiling fan, not the volume of air being moved.
When operated in the forward direction (for cooling) a ceiling fan will produce a column of air directly beneath the fan that is about the same as the diameter of the fan.
It is within this column of air directly beneath a ceiling fan where you will actually feel the most intense airflow and most benefit from the cooling effect.
If you take the exact same fan and put different sized blades on it, larger blades will put more drag on the motor and cause it to spin
slower at high speed, which lowers the intensity of the airflow, but spreads it over a larger area. Conversely, smaller blades will allow the fan to spin faster, which will
generate more intense airflow (higher wind speed), but over a smaller area. This is why manufacturers will use larger motors in fans with larger blade spans, so that the larger fan
will spin just as fast as the smaller fan, and hence move more air. But there are limitations to how fast a fan can spin based on size (read more about this further down).
I like to equate CFM - vs - Wind Speed to a garden hose with or without a pressure nozzle.
With no nozzle, the water flows unrestricted in a wider column with little pressure. If you reduce the area where the water comes out of the hose with a pressure nozzel, the water comes out
in a highly pressurized stream. The actual volume of water (flow rate) coming out of the hose without a nozzle may be about 12 gallons per minute, compared to about 6 gallons per minute with
the nozzle on. So if you were shopping for a hose or nozzle because you wanted to hose down your driveway, the 12 gallons per minute number seems larger, but you know for a fact that having
a nozzle will do a better job. So it is not the amount of water used that is important to clean your driveway, it is the amount of water pressure. With ceiling fans, wind-speed in MPH is like water
pressure and CFM airflow is like water volume or flow rate. So when shopping for ceiling fans, the size of the fan (area it will cover) and actual wind-speed (MPH) is what you need to know.
If you just want to move a lot of air around in the house without feeling it,
then you want CFM, which is wind volume. But who wants that? You want to feel cool, right? So the bottom line is, you want to be able to compare the wind speed between ceiling fans. Now if you
have 2 fans that are exactly the same diameter and one produces more airflow (CFM), then that fan will produce a higher wind speed. But how about 2 fans that are different sizes, yet produce
the same airflow (CFM)? The smaller fan will actually generate a higher wind speed because it must move the air faster in order to generate the same CFM as the larger fan.
Take a look at the comparison between the two fans below. The large 84" diameter fan produces a very high airflow over 10,000 CFM, whereas the smaller 54" fan produces about 20% less CFM airflow.
If you consider just the difference in CFM between the fans you might conclude that the larger fan will keep you 20% cooler. But the actual wind speed of the larger fan is only 2.98 MPH compared
to 5.94 MPH for the 54" fan. Although the smaller fan moves 20% less air, it actually provides twice as much cooling effect than the larger fan where the wind speed is diluted over larger area.
Ceiling Fan Comparison Graph
Breeze Rating: 5.5 (5 is best)
Wind Speed Factor: 4.51 MPH
Graph represents 54" blade span
How to read our graphs
Ceiling Fan Comparison Graph
Breeze Rating: 2 (5 is best)
Wind Speed Factor: 2.49 MPH
Graph represents 84" blade span
How to read our graphs
Why not just make the larger fan even more powerful?
So why don't ceiling fan manufacturers just put a more powerful motor in the larger fans to make them spin faster and increase the wind-speed?
Unfortunately, there are regulations that limit how fast ceiling fans are allowed to spin in residential applications. These limitations are a safety measure to minimize bodily harm
in cases where someone sticks their hand in the air or does something really stupid that causes them to get hit by the fan (you can search YouTube for examples).
The maximum allowed RPM is based on how fast the tip of the blade travels as it goes around.
The larger a fan is, the faster the blade tip travels through the air during each revolution. So larger fans like the 84" fan above simply cannot be allowed to move faster in order to increase
the wind speed. The only way to increase wind speed once the maximum allowed RPM has been reached is to improve the efficiency of the blades with aerodynamics. If you look closely at the
larger fan, you will see the blades already have a more aerodynamic design than the smaller fan, which has flat traditional style wood blades.
So what is the takeaway from this is?
For a large area, two fans with high wind speed will keep you much cooler than a single larger fan with a lower wind speed. If you can only install a single fan, look for a model with the highest
CFM, but do not expect to feel as much cooling effect as you would from a smaller fan.
Ceiling Fan Articles:
Everything you need to know about ceiling fans and more. If you have a question about ceiling fans that you cannot find in these resources give us a call at: 1-800-201-1193 or send an email to our webmaster: email@example.com
Wind Speed Calculator
Fan Size -vs- Wind Speed -vs- CFM
Note: The formula for calculating wind speed was revised on 1/31/2015. The previous formula did not take into account that the testing chamber (cylinder) used to determine the CFM of a fan is 8" in diameter larger than the blade span. The revised formula ads 8" to the fan diameter to account for this. The wind speed results are now slightly lower than previosly stated
"When it comes to ceiling fan size...the largest fan with the highest wind speed that will look fine in the area is the best choice!"
Ceiling fans cool you off by creating a wind-chill effect, the degree of which is determined by the wind speed produced by the fan; the higher the wind speed, the cooler you feel. It is critical to know the following; CFM is not the same as wind speed; the wind chill effect you feel from a ceiling fan is concentrated in the column of air directly beneath the fan blades; the wind chill drops off dramatically just a foot or two outside that area.
Ceiling fan manufacturers are required by the DOE to publish the airflow of each fan in CFM (Cubic Feet per Minute) which is not the same as wind speed. CFM is the volume of air being moved every minute, whereas wind speed how fast the air is moving in MPH (Miles per Hour) or LFM (Linear Feet per Minute), both of which are directly related to the amount of wind chill effect. When you compare two fans that are different sizes yet have the same CFM you will find they produce quite different wind speeds. The smaller fan must move air faster in order to move the same amount of air per minute (CFM) as the larger fan. The airflow generated by the smaller creates more wind chill because it is more concentrated and has a higher wind speed. The larger fan of equal CFM moves air over a larger area so it is less concentrated at a lower wind speed. So when determining what size fan to buy you must consider the amount of space a fan will cover (the diameter of the fan plus a foot or two), the intensity of the airflow directly beneath the fan (the wind speed) balanced with how any particular size fan will look or fit in the space. Ultimately the largest fan with the highest wind speed that will look fine in the area is the best choice for performance.
The required testing method for ceiling fans is not done in a way that translates well to real world applications, so the CFM data can be somewhat deceiving if you do not know how to interpret it.
The current required test procedure (shown left) shows a ceiling fan hanging above a 3 foot tall metal cylinder that is 8 inches wider than the ceiling fan (blade span) and stands 4 feet above the floor. Sensors are located at the bottom of the cylinder to measure the wind speed. The wind speed is then converted into CFM (Cubic Feet per Minute). Although this testing procedure can be valuable for comparing the performance of fans equal in size, it does not emulate a real application inside a home and does not make it easy to compare fans that are different sizes in order to determine the best size fan(s) for any particular application.
Therefore, the best way to compare the actual performance between fans of various sizes is to compare the wind speed. The wind speed of a ceiling fan can be mathematically calculated based on the CFM and Blade Span. Here is a comparison where we performed the calculations between 3 fans of different blade spans and CFMs. The largest fan has the highest CFM yet the smallest fan produces the highest wind speed.
84" Fan with CFM of 10000 produces wind speed of 2.46 MPH (216.62 LFM)
52" Fan with CFM of 6500 produces wind speed of 3.76 MPH (331.04 LFM )
The above example shows how deceiving CFM data can be. Even though the 52" fan moves 35% less air than the 84" fan, the intensity of the breeze that produces a wind-chill effect is over 50% more than that of the larger fan and will make you feel much cooler if you are directly beneath it. So, to cover a larger area, two or more smaller fans with good performance may be a better choice than a single large higher CFM fan.
Please send questions or comments about this article to:
or Call: 1-800-201-1193
Let Us Help You!
Our experts would love to answer your questions and help you find what you need!
Answers to Recent Ceiling Fans Questions Posted To This Page
- Question #9510 - Posted: 12/29/2016 6:01:26 PM
Ceiling Fans Question Model CA-59060
QUESTION: Casablanca Whitman Ceiling Fan Model 59060
Will this fan work with both the wall control and the remote? I do not want to find the remote when just walking out of the bedroom and prefer the wall switch, but would like the ability to use the remote feature while in bed. Do both control the dimmers? Do the dimmers work with the new LED dimmable bulbs?
ANSWER: The Casablanca Whitman fan comes with a wall control. Both the wall control and optional remote control can be used along with each other, so the answer is yes, you can use the remote from your bed and the wall control when you enter or exit the room. Both controls have full function of the fan including the fan speeds, reverse and, yes, dimming for the lights. The fan comes with two 50 watt halogen bulbs. There are currently no LED bulbs that you can buy to replace the halogen bulbs that will provide any more light than a couple of night lights, so it is not practical to use LED lights in this fan. Even if you did, the dimmer function would most likely not work since the wattage of the LED bulbs would be too low for the range of the dimmer. So, unfortunately I would have to say no to your last question.
- Question #9509 - Posted: 10/1/2015 4:43:21 PM
Ceiling Fans Question Model CF788VNB-72
QUESTION: I am looking at the Emerson Carrera Grande Eco 72 (DC Motor) Ceiling Fan Model CF788VNB, however regarding fan blades for an outdoor-damp location, would these blades tend to warp over a few years in a humid environment? I have had many outdoor fans, and they almost all end up with warped blades over time. Do you offer blades that would be less prone to warping, or are these already "resistant"?
ANSWER: When you click on the orange button for blades, look for blades that say "(Outdoor Damp)". Emerson specially makes the damp rated blades from solid hardwood (instead of cheap plywood) that is treated to resist cracking and warping from being outside. They will hold up much better than what you have experienced and are in fact rated for use in outdoor damp locations by the manufacturer.
- Question #9508 - Posted: 10/1/2015 4:37:34 PM
Ceiling Fans Question
QUESTION: I just bought a house with a Halsey ceiling fan and I want to add a light to it. The universal light kit only works sometimes! Where can I find Halsey light kits to fit models HC-HP and HG models?
ANSWER: I am sorry to report that Halsey went out of business several years ago, so finding parts for them is difficult. It is not a brand that we ever sold, so we would not have any fixtures on hand that were made by them. If you email me some pictures of your fan, I may be able to determine what types of universal fixtures will fit...if any. Email pictures to: firstname.lastname@example.org
- Question #9507 - Posted: 10/1/2015 4:33:29 PM
Ceiling Fans Question Model EM-CF766VS
QUESTION: The location I am considering was wired only for a light and no fan (1 wire pair). How do I tell which lights are compatible and which are not?
ANSWER: Almost all of our ceiling fans with lights do not require a second hot wire, so they will work with a 1 wire pair...there are very few exceptions. If you give us a call, we will be happy to help you choose the best fan for your needs and make sure you can install it.
- Question #9504 - Posted: 11/22/2014 1:30:40 PM
Ceiling Fans Question Model SV-14-325-FD-SN
QUESTION: How far down from the ceiling does the Seaside fan hang when installed with the flushmount option?
ANSWER: Thanks for your question: The Seaside fan from Savoy House comes with an 8" downrod as well as a flush mount adapter. The bottom of the fan cage hangs 16.3" from the ceiling when installed with the 8" downrod. Although the manufacturer does not specify the hanging distance with the flush mount option, after reviewing the installation instructions I have estimated that the flush mount option will reduce the distance by at least 6" to be safe...if not a bit more. That would put the bottom of the fan at about 10" from the ceiling.
- Question #9502 - Posted: 7/6/2014 9:17:41 AM
Ceiling Fans Question
QUESTION: Do you happen to carry Hunter fan light fixtures that have a triangle base. These are not held in by screws but by a clip system.
ANSWER: I am sorry to report that we do not have any of the Hunter light fixtures you are looking for. Hunter only made the triangular fixtures for a short period of time and they discontinued them several years ago (too many problems). It is unlikely that you will be able to locate one anywhere. If you can email me some pictures of your fan along with the model number (located on a label on top of the fan housing), I may be able to come up with an alternative that will fit. Email your pictures to: email@example.com
- Question #9500 - Posted: 7/3/2014 1:55:05 AM
Ceiling Fans Question Model VEL-HUG-BN-50-NK-NL-NC
First off, I love all the consumer information Hansen Wholesale provides.
I'd love a clarification on something. You say that hugger fans don't work as well as regular ceiling fans. This makes total sense. However, why would the Modern Fan Velo Hugger be rated at the same 6650 CFM and 5.54 MPH wind speed as the regular Velo?
(Is it because the blades are installed as low as possible on the hugger fan, thus negating the height benefits?)
ANSWER: You are exactly correct. When installed with a standard downrod, the regular Velo hangs down the same distance as the Velo Hugger, so the airflow is the same.
- Question #9499 - Posted: 7/2/2014 11:30:33 PM
Ceiling Fans Question Model SV-58-819-5WA-37
Per the information on the site, the new DC motors, the Emerson K55XL, and other "induction" type motors are considered best quality. If that's the case, how do fans with smallish non-special motors (Say, Savoy House Indira, with 153 x 22mm motor) earn a 5 rating?
There are exceptions. A 5 rating is not just based on the motor inside the fan, but the overall consideration of the quality of the components and performance. Most 153mm motors are only 12mm to 15mm tall and tend to be overworked. The motor used in the Indra is 22mm tall, which is very unusual. This is a special motor that Savoy House had designed for this fan and the performance and quality of the motor are excellent. The 3-blade Indra produces a whopping 8517 CFM and runs very smooth and quiet. The entire fan was designed to produce maximum airflow while reducing noise. The blades have a very special aerodynamic design and the fan runs perfectly quiet. When I saw this fan introduced at the lighting show in Dallas, I was very impressed. Overall, one of the best fans I have rated in years. A DC motor would have been nice...but was not necessary to earn a 5 in my book.
Here is a link to the Savoy House Indra