Emerson Designer Ceiling Fan
Choose Custom Options & Accessories Here
Shown in Picture: Emerson Designer Ceiling Fan Model CF755BS in Brushed Steel. Reversible Dark Cherry/Mahogany finished blades are included as shown. Comes with 3 Speed Pull Chain. The designer features a seamless housing with no visible hardware for a more attractive look. You will find the Designer in a variety of finishes to fits your needs. The Designer is the fan to choose for exceptional quality and value.
Ceiling Fan Comparison Graph
This graph makes it easy to compare features between fans. Pay particular attention to the "Breeze Rating" and "MPH or Wind Speed Factor" which give you the best idea of how much cooling effect you might expect from this fan.
For questions about our comparison graph read more here
Room Settings Viewer
Included Control (EM-3S): 3 Speed Pull Chain.
(Building codes require blades to be at least 7' from the floor)
View Additional Product Details
Click on each tab to below show or hide additional details and resources for this fan...
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing.
|Model Name|| Emerson Designer|
Features & Specifications
|Motor Size|| 188mm x 12mm Motor|
|Quality Rating|| 4 out of 5 (5 is best)|
|Blade Pitch|| 14 degree blade pitch|
|Blade Span|| 44" or 52" blade span|
|Blade Qty|| 5 blades|
|Blades Color||Reversible Dark Cherry/Mahogany finished blades (included)|
|RPMs|| 60 to 200 RPM|
|Speeds|| 3 Speeds|
|Reverse Function|| Yes|
|Indoor Rating||UL Listed for use indoors|
Cannot be used outdoors
|Includes Uplight|| No|
|Inludes Downlight|| No|
|Can Lights be Added?|| Yes|
|Accepts Universal Light Kits|| Yes|
|Voltage||Uses 120 Volt electricity|
|ENERGY STAR Qualified||
|Style Group|| Traditional|
|Approx. Weight|| 25 lb.|
|Warranty|| 30 Year Limited Motor Warranty|
|Included Downrod(s)|| 3 1/2"|
|Flushmount Capability|| Nearly flush w/optional CFDR25 (sold separately)|
|Leadwire Length|| Not Published|
(X) Hide This
Other Finishes for this Ceiling Fan
Designer Pull Chain (with Standard Pull Chain - 120 Volts)
(X) Hide This
This label is required by the FTC to be published
by any company selling this fan on the Internet.
at High Speed
Cubic Feet Per
Minute Per Watt
49" to 60"
ceiling fans have airflow efficiencies
ranging from approximately
51 to 176
cubic feet per
minute per watt at high speed.
Money-Saving Tip: turn off fan when leaving room
(X) Hide This
Low, High or Vaulted Ceiling Installation Options
Minimum Ceiling Height Requirement: This fan requires a minimum ceiling height of at least 96" in order to meet building codes. If your ceiling is lower than 96" then you may need to add a flushmount adapter or close to ceiling dowrod if one is available for the fan (see below).
If you cannot find what you need to make this fan work in your room, please give us a call so we can check to see if there are any further alternatives.
Note: This fan includes 3 1/2" downrods(s)
Indoor and Outdoor Limitations
UL Listed for Indoor use only
The Emerson Designer is UL Listed for Indoor use only, so it is not designed to be exposed to moisture or harsh elements. Do not install this fan outside your house. It is also not recommended
for bathrooms that have a shower or tub or laundry rooms, both of which produce excessive amounts of moisture.
(X) Hide This
How does the Emerson Designer Compare to the Average Ceiling Fan?
Ceiling Fan Comparison Graph
Breeze Rating: 4 (5 is best)
Wind Speed Factor: 3.35 MPH
Graph represents 52" blade span
How to read our graphs
Quality Rating = 4 (average is 3)
A Quality Rating of 4 is above average, the Emerson Designer ceiling fan will run smooth and quiet and will give you many years of operation with no worries of the motor burning out.
Note: CFM and Wind Speed are calculated using standard shaped 52" blades. The size and shape of the blades will alter the performance dramatically. For example: Palm style and carved wood leaf shaped blades can reduce performance by as much as 50%!
Wind Speed Factor: 3.35 MPH (average is about 3)
Airflow = 5796 CFM
A Wind Speed Factor of 3.35 MPH gives this fan a Breeze Rating of 4 out of 5.
This is above average when it comes to ceiling fans, so you can expect to feel a decent amount of cooling breeze, but it is not the best.
Aside from Quality, which accounts for smooth quiet operation and durability, the amount of wind-chill a fan can provide to cool you off is the most important consideration.
Afterall, why do want a ceiling fan in the first place?
(average is about 5,000)
5796 CFM is pretty much average, so don't expect a super strong breeze from this fan. However, most people are used to average ceiling fans, so if you have never experienced a fan more powerful than this, you may be satisfied with the Emerson Designer.
This fan should allow you to raise your thermostat by 1 or 2 degrees to save between 5% and 15% on your cooling bills (if you have AC).
Efficiency Rating = 79 CFM/Watt (average is about 86)
An Efficiency Rating of 79 is
Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of
electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more
CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if
you expect to operate several ceiling fans at the same time. (see calculator below)
Electrical Usage = 73 Watts (average is about 76)
73 Watts per hour is
pretty close to average, so it will cost about the same to operate the Emerson Designer as most other ceiling fans.
Use the calculator below to estimate just how much it will cost to operate this fan in "Your home".
Wind Speed Factor -vs- Efficiency: Wind Speed is KING! Ceiling fans can save you a lot on your energy bills if you use them properly to reduce your use of central air.
Ceiling fans cool you off by creating a wind-chill effect, so the more wind speed a fan generates, the cooler it will make you feel. The cooler your ceiling fan can make you feel, the higher you can raise your AC thermostat to conserve energy without sacrificing your level of comfort. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills, but you cannot raise your thermostat by 10 degrees if you focus only on ceiling fans that use less energy rather than ones that generate higher wind speed. To put this in perspective: A typical central air system uses about 3500 Watts when it is running, so if a ceiling fan that uses 100 watts allows you to raise your thermostat a couple degrees higher than a more "efficient" fan that uses only 50 watts, the savings you will get by raising your AC therestat a couple degrees higher is far more than the difference of 50 watts between the two fans. With that said, a ceiling fan that uses less watts yet produces higher wind speed is a win-win.
(X) Hide This
(Calculate the wind speed of a ceiling fan by plugging in the CFM and Blade Span above)
Fan Size -vs- Wind Speed -vs- CFM
Note: The formula for calculating wind speed was revised on 1/31/2015. The previous formula did not take into account that the testing chamber (cylinder) used to determine the CFM of a fan is 8" in diameter larger than the blade span. The revised formula ads 8" to the fan diameter to account for this. The wind speed results are now slightly lower than previosly stated
"When it comes to ceiling fan size...the largest fan with the highest wind speed that will look fine in the area is the best choice!"
Ceiling fans cool you off by creating a wind-chill effect, the degree of which is determined by the wind speed produced by the fan; the higher the wind speed, the cooler you feel. It is critical to know the following; CFM is not the same as wind speed; the wind chill effect you feel from a ceiling fan is concentrated in the column of air directly beneath the fan blades; the wind chill drops off dramatically just a foot or two outside that area.
Ceiling fan manufacturers are required by the DOE to publish the airflow of each fan in CFM (Cubic Feet per Minute) which is not the same as wind speed. CFM is the volume of air being moved every minute, whereas wind speed how fast the air is moving in MPH (Miles per Hour) or LFM (Linear Feet per Minute), both of which are directly related to the amount of wind chill effect. When you compare two fans that are different sizes yet have the same CFM you will find they produce quite different wind speeds. The smaller fan must move air faster in order to move the same amount of air per minute (CFM) as the larger fan. The airflow generated by the smaller creates more wind chill because it is more concentrated and has a higher wind speed. The larger fan of equal CFM moves air over a larger area so it is less concentrated at a lower wind speed. So when determining what size fan to buy you must consider the amount of space a fan will cover (the diameter of the fan plus a foot or two), the intensity of the airflow directly beneath the fan (the wind speed) balanced with how any particular size fan will look or fit in the space. Ultimately the largest fan with the highest wind speed that will look fine in the area is the best choice for performance.
The required testing method for ceiling fans is not done in a way that translates well to real world applications, so the CFM data can be somewhat deceiving if you do not know how to interpret it.
The current required test procedure (shown left) shows a ceiling fan hanging above a 3 foot tall metal cylinder that is 8 inches wider than the ceiling fan (blade span) and stands 4 feet above the floor. Sensors are located at the bottom of the cylinder to measure the wind speed. The wind speed is then converted into CFM (Cubic Feet per Minute). Although this testing procedure can be valuable for comparing the performance of fans equal in size, it does not emulate a real application inside a home and does not make it easy to compare fans that are different sizes in order to determine the best size fan(s) for any particular application.
Therefore, the best way to compare the actual performance between fans of various sizes is to compare the wind speed. The wind speed of a ceiling fan can be mathematically calculated based on the CFM and Blade Span. Here is a comparison where we performed the calculations between 3 fans of different blade spans and CFMs. The largest fan has the highest CFM yet the smallest fan produces the highest wind speed.
84" Fan with CFM of 10000 produces wind speed of 2.46 MPH (216.62 LFM)
52" Fan with CFM of 6500 produces wind speed of 3.76 MPH (331.04 LFM )
The above example shows how deceiving CFM data can be. Even though the 52" fan moves 35% less air than the 84" fan, the intensity of the breeze that produces a wind-chill effect is over 50% more than that of the larger fan and will make you feel much cooler if you are directly beneath it. So, to cover a larger area, two or more smaller fans with good performance may be a better choice than a single large higher CFM fan.
(X) Hide This
|This is an ENERGY STAR Qualified Ceiling Fan
Ceiling fans that have earned the ENERGY STAR feature the latest in energy-efficiency technology including a more energy-efficient motor and improved blade design. Fans with built-in lighting include ENERGY STAR qualified bulbs that last up to 10 times longer and use 2/3 less energy than incandescent bulbs-saving energy, money, and time replacing light bulbs. See more ENERGY STAR Ceiling Fans Here!
(X) Hide This
Included With This Fan (as shown):
in Brushed Steel
|Shipping & Sales Tax:
|Itemized Total Price
Sale Price: $219.00
Availability & Lead Time
Over 50 In Stock!
Ships in 3 to 4 Buisiness Days
(direct from manufacturer)
Emerson CF755BS Specs
| Part Number||CF755BS|
| Our Part Number||EM-CF755BS|
| Model Name||Traditional in Brushed Steel|
| Description: The Designer features a seamless housing for a clean, attractive look. You'll find it in a variety of finishes to fit your neds. The Designer fan is the one to choose for exceptional quality and value. Features: *52" blade span with 14° blade pitch *Light fixture adaptable *3.5" downrod *Five reversible blades *Decorative canopy cover *Energy Star qualified *Limited lifetime motor warranty|
| Product Name||Designer|
| Finish||Brushed Steel|
| # of Blades||5|
| Blades Included?||Yes|
| Blade Finish||Dark Cherry/Mahogany|
| Number of Speeds||3|
| Reverse Function||Manual|
| Motor Warranty||Lifetime|
| Energy Star||Yes|
| Airflow CFM (High Speed)||5796|
| Watts (High Speed)||73|
| Amps (High Speed)||0.65|
| Efficiency (CFM/Watt)||79|
| Control||Pull Chain|
| Downrod Length||3.5"|
| Accepts 2.5" Downrod||Yes|
| Downlight||Light Kit Adaptable|
| A (Height Ceiling to Bottom)||12|
| B (Height Ceiling to Blade)||14|
| C (Housing Diameter)||12|
| D (Canopy Diameter)||6.4|
| Keywords||ceiling fan, ceiling fans, ceilings fan, indoor ceiling fan, energy star ceiling fan, energy efficient ceiling fan, LED ceiling fan light, traditional ceiling fan|
| Compatible with (Controls)||SR400, SR401, SW405, SW406, RCFP, SR600, SR650, SW605, RC188, SW46, SW95, SW96, SW93, SW128|
| Compatible with Slope Ceiling Kit)||Compatible as boxed|
| Item Weight||18|
| Carton Weight||21|
| Carton Length||20.75|
| Carton Width||10|
| Carton Depth||13.25|