Craftmade Patterson in Oiled Bronze Gilded
PAT64OBG5 - Craftmade Patterson in Oiled Bronze Gilded
- 5400 CFM (2.17 MPH Breeze)
- Oiled Bronze Gilded Motor w/Reversible Teak/Walnut Blades
- 64 Inch Blade Span | Unknown Degree Pitch
- Rated For Indoors (dry rated)
- 188mm x 25mm - AC Motor
- 3 Speed Pull Chain
Starting At $0.00
Other Finishes for this Ceiling Fan

How does the Craftmade Patterson in Oiled Bronze Gilded Compare to the Average Ceiling Fan?

Quality Rating = 4.000000 (average is 3)
A Quality Rating of 4 is above average, the Craftmade Patterson in Oiled Bronze Gilded ceiling fan will run smooth and quiet and will give you many years of operation with no worries of the motor burning out.
Wind Speed Factor: 2.17 MPH (average is about 3)
A Wind Speed Factor of 2.17 MPH gives this fan a Breeze Rating of 2 out of 5.
This is very light breeze, so don't expect to experience very much cooling effect from the Patterson.
Keep in mind that fans with a large blade span like this one may move lots of air when it comes to CFM (Cubic Feet per Minute), but the airflow is spread over a larger area, so the actual concentration of the airflow (wind speed) is usually less than that of normal size fans. For the best wind-chill effect in larger rooms you may want to consider two or more smaller fans (50" to 56") that have a significantly higher wind speed factor. However, if you can only install a single fan, a larger fan like this may be a reasonable compromise. Just don't expect to feel as much breeze as the abnormally high CFM rating leads you to believe.
Aside from Quality, which accounts for smooth quiet operation and durability, the amount of wind-chill a fan can provide to cool you off is the most important consideration.
Airflow = 5400 CFM (average is about 5,000)
5400 CFM is pretty much average, so don't expect a super strong breeze from this fan. However, most people are used to average ceiling fans, so if you have never experienced a fan more powerful than this, you may be satisfied with the Craftmade Patterson in Oiled Bronze Gilded. The 2.17 MPH wind speed is a little lower than you might expect with such a high airflow. The wind speed tells you how much breeze you can expect to feel when you are beneath the fan. Due to the blade span of this fan, the actual concentration of airflow is spread over a larger area, so the ultimate cooling effect is a little less than some fans with smaller blade spans. This is a compromise that you may be willing to accept if the actual area where you spend your time is further away from the center of the fan, which is why you may consider a larger fan such as this one. In this case the Craftmade Patterson in Oiled Bronze Gilded will allow you to raise your thermostat by 1 or 2 degrees, which will still help you save additional money on your cooling bills (if you have AC).
Efficiency Rating = 74 CFM/Watt (average is about 86)
An Efficiency Rating of 74 is fairly average.
Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of
electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more
CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if
you expect to operate several ceiling fans at the same time. (see calculator below)
Wind Speed Factor -vs- Efficiency: Wind Speed is KING! Ceiling fans can save you a lot on your energy bills if you use them properly to reduce your use of central air. Ceiling fans cool you off by creating a wind-chill effect, so the more wind speed a fan generates, the cooler it will make you feel. The cooler your ceiling fan can make you feel, the higher you can raise your AC thermostat to conserve energy without sacrificing your level of comfort. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills, but you cannot raise your thermostat by 10 degrees if you focus only on ceiling fans that use less energy rather than ones that generate higher wind speed. To put this in perspective: A typical central air system uses about 3500 Watts when it is running, so if a ceiling fan that uses 100 watts allows you to raise your thermostat a couple degrees higher than a more "efficient" fan that uses only 50 watts, the savings you will get by raising your AC thermostat a couple degrees higher is far more than the difference of 50 watts between the two fans. With that said, a ceiling fan that uses less watts yet produces higher wind speed is a win-win.
Performance Data
Speed | RPMs | CFMs | Amps | Watts | EPA Efficiency (CFMs/Watt) |
---|---|---|---|---|---|
High | 111 | 5400 | 0.61 | - | NA |
Med | 83 | - | - | - | NA |
Low | 53 | - | - | - | NA |
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing.
This label is required by the FTC to be published
by any company selling this fan on the Internet.
ENERGY INFORMATION
at High Speed
Airflow 5400 Cubic Feet Per Minute |
Airflow Unknown Watts (excludes lights) |
Airflow Efficiency 74 Cubic Feet Per Minute Per Watt |
Compare: 49" to 60" ceiling fans have airflow efficiencies
ranging from approximately 51 to 176 cubic feet per
minute per watt at high speed.
