DXF Fireplace Doors with Laser Cut Decorative Patterns

The doors on this page are laser cut from solid steel using DXF patterns. They have a patterned outer door with or without glass and secondary inner door with wire mesh so you can burn the fire with the patterned doors open or closed when ordered without glass. All patterns on this page are the same price starting at $2800.00 and up depending on size and finish. If you want to be able to burn a fire with glass doors closed, you must add special ceramic glass for an additional $800 to $1200 depending on the size (masonry fireplaces only). Otherwise, the normal tempered glass must be burned with the doors open. We have many more patterns available that we can share with you depending on your desires. You can also provide your own design if you can ceate a .DXF file.

See Finish Options Below

Cabinet Doors

Bifold Doors

Hearth Creations Finishes

Note from the Webmaster: Finishes appear different on every computer screen, so there is no way to accurately represent any finish on the Internet. They also can look quite different depending on the lighting in your room and the lighting when they were photographed. These are pictures of samples that we took in natural sunlight. Some of the samples have scratches and imperfections from being handled over time, so they do not represent the true quality of the finished products. Samples are available for purchase (call for details).

Standard Powder Coat Finishes

Starting Price: $2800.00 (Cabinet) | $2900.00 (Bifold)

Powder coat finishes are applied electrostatically, and are then cured buy heat. This type of finishing process is superior to high temperature paint because it forms a hard coating over the metal that is highly impervious to heat and will not rust. The process is precisely formulated and produces very consistent results with fewer imperfections. It is also the least expensive finishing process, although it has limitations and cannot replicate the more expensive artistic finishes that are hand crafted.

Premium Finishes

Starting Price: $3200.00 (Cabinet) | $3300.00 (Bifold)

Premium finishes are either hand crafted or must go through multiple steps to be applied. Because these are hand applied the finishes are not as consistent and each product will have slight variations from another. If you are looking for a more consistent finish we recommend you stick with the powder coat or anodized finishes. Stainless steel is included in this group just because the cost is the same as other premium finishes.

Plated Finishes

Starting Price: $4900.00 (Cabinet) | $5000.00 (Bifold)