Fireplace Doors for Large Fireplaces

Fireplaces that are over 48" wide or 34" tall almost always require custom fireplace doors. In most cases, the doors will require what are called "Fixed End Panels" (see examples below). Fixed end panels are panes of glass that do not open. Fixed end panels are needed in order to cut down the size of the functional doors so that they can open and close properly and to reduce the size of each glass pane to less than 3 square feet. For safety reasons and structural integrity, we will not make any fireplace door where any single pane of glass is larger than 3 square feet. It is possible to have the fixed end panels operate as doors themselves separate from the main doors, but it is usually not necessary, so we make them fixed.

Most of our fireplace doors can be made with fixed end panels and you can See Our Fireplace Doors Here!

Brookfield

Option #1: Brookfield Fireplace Door. Shown in Rustic Black with Fixed End Panels. This see through outdoor fireplace measured roughly 58" W x 28" H. We also supplied the gas logs.

Brookfield

Option #2: Brookfield Fireplace Door. Shown in Natural Iron with Fixed End Panels and Mesh Curtains. This particular fireplace measured approximately 60" W x 30" H.

Legend

Option #3: This is a Legend fireplace door with an Arched Window Pane option and Fixed End Panels. This fireplace opening was roughly 54" W x 48" H.

Stone Creek

Option #3: Stone Creek Fireplace Door. This was a custom Legend door made in 3 sections that allowed the door to be installed behind the stone. The two end panels are fixed, but could also have been made to open. Because this was outdoors at a hotel, we also added key logs for the doors. This was a very large door.

Stone Creek

Option #4: Stone Creek Fireplace Door (alternative view).

Legend

Option #5: Legend Door with Fixed End Panel. Here's an example of a fireplace that needed a fixed end panel to cover a ledge inside the fireplace. In this case, we could also make that end panel operable.