Fireplace Gas Keys, Valve Covers and Match Holders
These gas keys, valve covers and match holders are hand made from solid brass, steel and wrought iron (depending on the finish) and can be made in a wide variety of finishes. Valve covers and Keys can be made to fit a variety of valves. See further details below.
These premium quality match holders are made to compliment other high end custom fireplace screens and doors made by Stone Manufacturing
Valve Cover Thread Options
- 1/2" Thread - Fits Price Dante valves
- 3/4" Standard Thread - Fits Price Pfister Valves
- 3/4" Fine Thread - Fits fine threaded valves
- 1" Thread - Fits Blue Flame Valves
- 7/8" Thread - Requires original valve cover for rework
- Custom Thread Stem Lengths Avaialable
- Diameter Options for VC-1 Round: 2", 2 1/2" (standard), 3" and 4"
- Custom Collar can be added to VC-1 Round in above diameters for protruding valves
- Custom hole diameter availble (standard is 11/16")
Gas Key Custom Options
Standard length is from base of handle to bottom of finial
- Custom lenght shaft from 2" to 24" in 1/2" increments
- Finial saudered to handle instead of threaded (optional)
- 5/16" Square Hole Finial (standard), 1/4" Square Hole - Price Pfitster, 1/4" Square Hole - Dante (requires special Narrow finial)
- Standard Finial 5/16" Diameter, Narrow Finial 9/16" Diameter
Measuring for Valve Covers and Gas Keys
There are several different brands of fireplace gas valves and they have different size threads and keys. So it is important for us to be able to identify what you have. Be sure to send us pictures like the ones you see below along with your measurements. It is best to take the pictures with your measuring tape in place so we can see how you measured. Email your pictures and measurements to: DesignService@hansenwholesale.com
- V1 (Fig. 1): Valve Cover Face Diameter
- V2 (Fig. 1): Valve Cover Thread Length
- V3 (Fig. 2): Valve Cover Inner Thread Diameter (ID)
- K1 (Fig. 3): Gas key shaft length. Measure from base of key to end of finial:
- K2 (Fig. 4): Gas key finial measurement. Should be either 1/4" or 5/16":
- Thread Photo (Fig. 5): Take a picture from an angle so we can see the inner thread of the valve cover and determine if it is standard or fine thread.
OR...Email your request to:
DesignService@HansenWholesale.com with subject: "Custom Fireplace Grate"