Call For Best Price: 1-800-201-1193
customer id--

Rasmussen Vented Gas Log Burners

Ordering Rasmussen Gas Logs Requires Professional Assistance

Call: 1-800-201-1193

Ordering Requires Professional Assistance

Important Notes: Below are the most popular types of burners for Rasmussen vented gas logs. This is a new product for Hansen Wholesale and we are adding more details almost daily, so other burners will be showing on this page soon. These burners can be used with most Rasmussen vented gas log styles depending on the log size. Each burner is shown with the EXF Evening Crossfire logs so you can compare the look.

F and FX Burners

Rasmussen FX Burner Rasmussen FX Burner with EXF Logs

The FX EmberEXTRA is a wedge-shaped burner pan that sits on the firebox floor. It is covered with sand and glowing embers beneath a grate where the logs are stacked. There is a main burner tube that provides lofty realistic flame up through the logs while two secondary ember boosters create a livelier bed of glowing embers than typical wedge burners. A slightly less expensive model F version is available without the ember boosters (not shown). Add N for Natural Gas; P for Propane after Item #.

Ordering Rasmussen Gas Logs Requires Professional Assistance

Call: 1-800-201-1193

Ordering Requires Professional Assistance

CS Burner Options

Rasmussen CS Burner Rasmussen CS Burner with EXF Logs

The CS Burner is the original pan tube burner and is available in black with strap legs or stainless steel with either strap or tubular legs. Each version can be installed with or without the legs to create a raised or flat look. The CS Burner may also be used in See-Through fireplaces with Double Face logs. The logs reside inside the burner on top of the pan filler material – no grate is to be used with the CS Burner. Great for single, double and multi-sided fireplaces. Add N for Natural Gas; P for Propane after Item #.

Ordering Rasmussen Gas Logs Requires Professional Assistance

Call: 1-800-201-1193

Ordering Requires Professional Assistance

CXF Burner Options

Rasmussen CXF Burner Rasmussen CXF Burner with EXF Logs

CXF is a combination of the CS and F burner systems with a tapered pan that sits flat on the fireplace floor with no legs and no grate. Logs, FireBalls, etc. sit in the pan. It incorporates a single pipe with a baffle and ember booster to distribute gas. For use in single-sided fireplaces. Excellent choice for prefab fireplaces with minimal height. Add N for Natural Gas; P for Propane after Item #.

Ordering Rasmussen Gas Logs Requires Professional Assistance

Call: 1-800-201-1193

Ordering Requires Professional Assistance

LC Burner Options

Rasmussen LC Burner Rasmussen LC Burner with EXF Logs

LC Burners are for use with 18" to 30" Evening Series logs that feature a broken front log. With two burner levels, a lower burner for embers and an upper burner for the main flame, this system provides maximum flame and increased height for larger masonry fireplaces. The entire structure is welded to a heavy grate and aliminates the use of a rear log. Add N for Natural Gas; P for Propane after Item #.

Ordering Rasmussen Gas Logs Requires Professional Assistance

Call: 1-800-201-1193

Ordering Requires Professional Assistance

LD Burner Options

Rasmussen LD Burner Rasmussen LD Burner with PH Logs

LD Burners are for use with TimberFire logs for massive sizes anywhere from 24" to 96". Similar in design to the LC series, just much bigger. With two burner levels, a lower burner for embers and an upper burner for the main flame, this system provides maximum flame and increased height for large to gigantic masonry fireplaces. The entire structure is welded to a heavy grate and aliminates the use of a rear log. The Timber Series front logs come in several pieces depending on the width. Add N for Natural Gas; P for Propane after Item #.

Ordering Rasmussen Gas Logs Requires Professional Assistance

Call: 1-800-201-1193

Ordering Requires Professional Assistance