Kichler 60" Ahrendale in Anvil Iron
310170AVI - Kichler 60" Ahrendale in Anvil Iron
- 5763 CFM (2.6 MPH Breeze)
- Anvil Iron Motor w/Distressed Antique Gray Blades
- 60 Inch Blade Span | 12 Degree Pitch
- Rated For Indoors (dry rated), Outdoor Covered (damp rated), Outdoor Uncovered (wet rated), High Wind (wet rated)
- 188mm X 20mm AC Motor
- 3 Speed Wall Control
Ceiling Fan Comparison Graph
|Number Of Bulbs||1|
|Additional Info||Country Of Origin- China|
|Blade Finish||Distrsd Ant Gry|
|Down Rod Included||1.00 OD X 4.50|
|Light Kit Included||Yes|
|Motor Fan Speed||3 Speed Wall Control Full Function|
|Motor Size||188MM X 20MM|
|Ship Carton Height||9.75|
|Ship Carton Length||36.75|
|Ship Carton Width||13.5|
|Vendor Ship Method||UPS|
|Base Backplate||6.75 DIA|
|Max Stem Tilt||30|
|Optional Light Kit Avail||Integrated|
|Ship Carton Cubic Feet||2.8|
How does the Kichler 60" Ahrendale in Anvil Iron Compare to the Average Ceiling Fan?
Quality Rating = 4.000000 (average is 3)
A Quality Rating of 4 is above average, the Kichler 60" Ahrendale in Anvil Iron ceiling fan will run smooth and quiet and will give you many years of operation with no worries of the motor burning out.
Wind Speed Factor: 2.6 MPH (average is about 3)
A Wind Speed Factor of 2.6 MPH gives this fan a Breeze Rating of 3 out of 5. This is rather average when it comes to ceiling fans, so you will feel some cooling breeze, but don't expect the 60" Ahrendale to blow your socks off. Aside from Quality, which accounts for smooth quiet operation and durability, the amount of wind-chill a fan can provide to cool you off is the most important consideration.
Airflow = 5763 CFM (average is about 5,000)
5763 CFM is pretty much average, so don't expect a super strong breeze from this fan. However, most people are used to average ceiling fans, so if you have never experienced a fan more powerful than this, you may be satisfied with the Kichler 60" Ahrendale in Anvil Iron. The 2.6 MPH wind speed is a little lower than you might expect with such a high airflow. The wind speed tells you how much breeze you can expect to feel when you are beneath the fan. Due to the blade span of this fan, the actual concentration of airflow is spread over a larger area, so the ultimate cooling effect is a little less than some fans with smaller blade spans. This is a compromise that you may be willing to accept if the actual area where you spend your time is further away from the center of the fan, which is why you may consider a larger fan such as this one. In this case the Kichler 60" Ahrendale in Anvil Iron will allow you to raise your thermostat by 1 or 2 degrees, which will still help you save additional money on your cooling bills (if you have AC).
Efficiency Rating = 80 CFM/Watt (average is about 86)
An Efficiency Rating of 80 is fairly average. Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if you expect to operate several ceiling fans at the same time. (see calculator below)
Electrical Usage = 72 Watts (average is about 76)
72 Watts per hour is pretty close to average, so it will cost about the same to operate the Kichler 60" Ahrendale in Anvil Iron as most other ceiling fans. Use the calculator below to estimate just how much it will cost to operate this fan in "Your home".
Wind Speed Factor -vs- Efficiency: Wind Speed is KING! Ceiling fans can save you a lot on your energy bills if you use them properly to reduce your use of central air. Ceiling fans cool you off by creating a wind-chill effect, so the more wind speed a fan generates, the cooler it will make you feel. The cooler your ceiling fan can make you feel, the higher you can raise your AC thermostat to conserve energy without sacrificing your level of comfort. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills, but you cannot raise your thermostat by 10 degrees if you focus only on ceiling fans that use less energy rather than ones that generate higher wind speed. To put this in perspective: A typical central air system uses about 3500 Watts when it is running, so if a ceiling fan that uses 100 watts allows you to raise your thermostat a couple degrees higher than a more "efficient" fan that uses only 50 watts, the savings you will get by raising your AC thermostat a couple degrees higher is far more than the difference of 50 watts between the two fans. With that said, a ceiling fan that uses less watts yet produces higher wind speed is a win-win.
Ceiling Fan Comparison Graph
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing.
Operational Cost Calculator(Instructions/Details)
This label is required by the FTC to be published
by any company selling this fan on the Internet.
Not all of the dimensions are available but we have added what we found. The fan hangs 16.5" from the ceiling to the bottom of the light and has a 60" blade span.
I have added other specifications that I could find as well.
Hope this helps.