Atlas Eliza Hugger in Brushed Nickel
EKH-BN-BN - Atlas Eliza Hugger in Brushed Nickel
- 5396 CFM (2.74 MPH Breeze)
- Brushed Nickel Motor w/ABS Brushed Nickel (silver colored) Blades
- 56 Inch Blade Span | 27 Degree Pitch
- Rated For Indoors (dry rated), Outdoor Covered (damp rated)
- Super Efficient DC Motor
- 6 Speed Remote Control
Other Finishes for this Ceiling Fan
Ceiling Fan Comparison Graph
Available in the following finishes: polished chrome, brushed nickel or textured bronze.
- Constructed of cast aluminum and heavy stamped steel.
- Limited Lifetime Warranty.
- Hand-Balanced metal blades and metal safety cages.
- A three-wire system is needed to operate the oscillation mechanism independent of the fan blades.
- 3-speed decora style wall control Included
- Side-mounted wall junction box
- Remote control is possible. Please inquire for details.
- Damp location: All standard finishes.
- Not recommended for salt water/ocean front applications.
- CFM: 1302
- Watts: 47
- RPM: 1445
- Blade Pitch 31 Degrees
How does the Atlas Eliza Hugger in Brushed Nickel Compare to the Average Ceiling Fan?
Quality Rating = 5.000000 (average is 3)
With a Quality Rating of 5, the Atlas Eliza Hugger in Brushed Nickel is among the finest quality ceiling fans made. It will run smooth and quiet without wobbling or making noise and you can let it run 24 hours a day for years on end without any worries of the motor burning out.
Wind Speed Factor: 2.74 MPH (average is about 3)
A Wind Speed Factor of 2.74 MPH gives this fan a Breeze Rating of 3 out of 5. This is rather average when it comes to ceiling fans, so you will feel some cooling breeze, but don't expect the Atlas Eliza Hugger to blow your socks off. Aside from Quality, which accounts for smooth quiet operation and durability, the amount of wind-chill a fan can provide to cool you off is the most important consideration.
Airflow = 5396 CFM (average is about 5,000)
5396 CFM is pretty much average, so don't expect a super strong breeze from this fan. However, most people are used to average ceiling fans, so if you have never experienced a fan more powerful than this, you may be satisfied with the Atlas Eliza Hugger in Brushed Nickel. The 2.74 MPH wind speed is a little lower than you might expect with such a high airflow. The wind speed tells you how much breeze you can expect to feel when you are beneath the fan. Due to the blade span of this fan, the actual concentration of airflow is spread over a larger area, so the ultimate cooling effect is a little less than some fans with smaller blade spans. This is a compromise that you may be willing to accept if the actual area where you spend your time is further away from the center of the fan, which is why you may consider a larger fan such as this one. In this case the Atlas Eliza Hugger in Brushed Nickel will allow you to raise your thermostat by 1 or 2 degrees, which will still help you save additional money on your cooling bills (if you have AC).
Efficiency Rating = 167 CFM/Watt (average is about 86)
An Efficiency Rating of 167 is very far above average. Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if you expect to operate several ceiling fans at the same time. (see calculator below)
Wind Speed Factor -vs- Efficiency: Wind Speed is KING! Ceiling fans can save you a lot on your energy bills if you use them properly to reduce your use of central air. Ceiling fans cool you off by creating a wind-chill effect, so the more wind speed a fan generates, the cooler it will make you feel. The cooler your ceiling fan can make you feel, the higher you can raise your AC thermostat to conserve energy without sacrificing your level of comfort. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills, but you cannot raise your thermostat by 10 degrees if you focus only on ceiling fans that use less energy rather than ones that generate higher wind speed. To put this in perspective: A typical central air system uses about 3500 Watts when it is running, so if a ceiling fan that uses 100 watts allows you to raise your thermostat a couple degrees higher than a more "efficient" fan that uses only 50 watts, the savings you will get by raising your AC thermostat a couple degrees higher is far more than the difference of 50 watts between the two fans. With that said, a ceiling fan that uses less watts yet produces higher wind speed is a win-win.
Ceiling Fan Comparison Graph
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing. Hugger fans are except from EPA required performance testing, so data is rarely available for hugger fans.
This label is required by the FTC to be published
by any company selling this fan on the Internet.