Atlas 60" Irene Hugger LED 5 Blade in Textured Bronze
IR5HLK-TB-WA-60 - Atlas 60" Irene Hugger LED 5 Blade in Textured Bronze
- 5266 CFM (2.37 MPH Breeze)
- Textured Bronze Motor w/CNC-Cut Solid Wood Walnut Tone Blades
- 60 Inch Blade Span | 15 Degree Pitch
- Rated For Indoors (dry rated), Outdoor Covered (damp rated)
- Super Efficient DC Motor
- 6 Speed Remote Control
Other Finishes for this Ceiling Fan
Other 60" Atlas Irene Hugger LED 5 Blade
42" Atlas Irene-HLK LED 3 Blade
52" Atlas Irene Hugger LED 5 Blade
42" Atlas Irene 3 Blade
42" Atlas Irene 5 Blade
52" Atlas Irene Hugger 5 Blade
42" Atlas Irene Hugger LED 5 Blade
Ceiling Fan Comparison Graph
How does the Atlas 60" Irene Hugger LED 5 Blade in Textured Bronze Compare to the Average Ceiling Fan?
Quality Rating = 5.000000 (average is 3)
With a Quality Rating of 5, the Atlas 60" Irene Hugger LED 5 Blade in Textured Bronze is among the finest quality ceiling fans made. It will run smooth and quiet without wobbling or making noise and you can let it run 24 hours a day for years on end without any worries of the motor burning out.
Wind Speed Factor: 2.37 MPH (average is about 3)
A Wind Speed Factor of 2.37 MPH gives this fan a Breeze Rating of 2 out of 5. This is very light breeze, so don't expect to experience very much cooling effect from the 60" Atlas Irene Hugger LED 5 Blade. Aside from Quality, which accounts for smooth quiet operation and durability, the amount of wind-chill a fan can provide to cool you off is the most important consideration.
Airflow = 5266 CFM (average is about 5,000)
5266 CFM is pretty much average, so don't expect a super strong breeze from this fan. However, most people are used to average ceiling fans, so if you have never experienced a fan more powerful than this, you may be satisfied with the Atlas 60" Irene Hugger LED 5 Blade in Textured Bronze. The 2.37 MPH wind speed is a little lower than you might expect with such a high airflow. The wind speed tells you how much breeze you can expect to feel when you are beneath the fan. Due to the blade span of this fan, the actual concentration of airflow is spread over a larger area, so the ultimate cooling effect is a little less than some fans with smaller blade spans. This is a compromise that you may be willing to accept if the actual area where you spend your time is further away from the center of the fan, which is why you may consider a larger fan such as this one. In this case the Atlas 60" Irene Hugger LED 5 Blade in Textured Bronze will allow you to raise your thermostat by 1 or 2 degrees, which will still help you save additional money on your cooling bills (if you have AC).
Efficiency Rating = 165 CFM/Watt (average is about 86)
An Efficiency Rating of 165 is very far above average. Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if you expect to operate several ceiling fans at the same time. (see calculator below)
Wind Speed Factor -vs- Efficiency: Wind Speed is KING! Ceiling fans can save you a lot on your energy bills if you use them properly to reduce your use of central air. Ceiling fans cool you off by creating a wind-chill effect, so the more wind speed a fan generates, the cooler it will make you feel. The cooler your ceiling fan can make you feel, the higher you can raise your AC thermostat to conserve energy without sacrificing your level of comfort. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills, but you cannot raise your thermostat by 10 degrees if you focus only on ceiling fans that use less energy rather than ones that generate higher wind speed. To put this in perspective: A typical central air system uses about 3500 Watts when it is running, so if a ceiling fan that uses 100 watts allows you to raise your thermostat a couple degrees higher than a more "efficient" fan that uses only 50 watts, the savings you will get by raising your AC thermostat a couple degrees higher is far more than the difference of 50 watts between the two fans. With that said, a ceiling fan that uses less watts yet produces higher wind speed is a win-win.
Ceiling Fan Comparison Graph
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing. Hugger fans are except from EPA required performance testing, so data is rarely available for hugger fans.
This label is required by the FTC to be published
by any company selling this fan on the Internet.
The AC to DC is already converted you just hook it up to the AC power. Only DC fans you can get where you can control two at a time is Modern forms see link here -> https://www.hansenwholesale.com/ceiling-fans/shop-by-brand/modern-forms
Please feel free to call me at 800-201-1193 x110 or 562-344-4110
We always give the best advice and discounts over the phone.
Toll Free: 800-201-1193 x110