Minka Aire Gyro in Brushed Nickel
F602-BN/CH - Minka Aire Gyro in Brushed Nickel
- 5050 CFM (4.21 MPH Breeze)
- Brushed Nickel Motor w/ABS Wood Tone Blades
- 42 Inch Blade Span | 20 Degree Pitch
- Rated For Indoors (dry rated)
- Dual 82mm x 25mm - AC Motor
- 3 Speed Wall Control
Starting At $0.00

*NOTE: Minka Aire measures the blade distance to the TOP of the blade. Please add approximately 1/2" to 1" to estimate the distance to the bottom of the blades.
Features & Specifications
Motor Size | Dual 82mm x 25mm - AC Motor Motor |
Quality Rating | 4 out of 5 (5 is best) |
Blade Pitch | 20 degree blade pitch |
Blade Span | 42" blade span |
Blade Qty | 6 blades |
Blades Color | ABS Wood Tone Blades finished blades (included) |
RPMs | 720 to 1350 RPM |
Speeds | 3 Speed |
Reverse Function | Yes |
Indoor Rating | UL Listed for use indoors |
Outdoor Rating | Cannot be used outdoors |
Includes Uplight | No |
Includes Downlight | Yes |
Downlight Type | Lights Included, Single Globe Fixtures |
Downlight Description | Included 100W Halogen Light Fixture for Gyro. BN/CH Finish comes with Opal Glass. RRB finish comes with Schoolhouse Globe. |
Downlight Bulbs | |
Downlight Wattage | 100 Watts |
Total Light Watts (including uplight) | 100 Watts |
Bottom Cap | Cannot be installed without lights |
Voltage | Uses 110 Volt electricity |
ENERGY STAR Qualified | No |
Style Group | Contemporary |
Approx. Weight | 30 lb. |
Warranty | Lifetime Limited Motor Warranty |
Included Downrod(s) | Includes 6" Downrod |
Flushmount Capability | Cannot Be Flush Mounted |
Leadwire Length | 80" |
Replacement Glass Options*
Please call to order replacement glass (if you have broken the glass on this fan).FREE REPLACEMENT GLASS: If you purchased your fan from us in the past 5 years (on or after March 31st 2009) and have broken your glass, we may replace it FREE OF CHARGE based on our 5 Year FREE Replacement Parts Plan. Please call us so that we can verify that you made your purchase from us and that your glass is in fact broken (email us a picture of your fan and broken glass). Once verified, we will get you a replacement at no charge (just another advantage of buying your ceiling fans here at Hansen Wholesale). *All replacement glass sales are final, no refunds or exchages.
How does the Minka Aire Gyro in Brushed Nickel Compare to the Average Ceiling Fan?

Quality Rating = 4.000000 (average is 3)
A Quality Rating of 4 is above average, the Minka Aire Gyro in Brushed Nickel ceiling fan will run smooth and quiet and will give you many years of operation with no worries of the motor burning out.
Wind Speed Factor: 4.21 MPH (average is about 3)
A Wind Speed Factor of 4.21 MPH gives this fan a Breeze Rating of 5 out of 5.
This is a stronger breeze than most ceiling fans, so if you are looking for a fan to keep you cool, the Gyro great choice.
Aside from Quality, which accounts for smooth quiet operation and durability, the amount of wind-chill a fan can provide to cool you off is the most important consideration.
Airflow = 5050 CFM (average is about 5,000)
5050 CFM is pretty much average, so don't expect a super strong breeze from this fan. However, most people are used to average ceiling fans, so if you have never experienced a fan more powerful than this, you may be satisfied with the Minka Aire Gyro in Brushed Nickel. This fan should allow you to raise your thermostat by 1 or 2 degrees to save between 5% and 15% on your cooling bills (if you have AC).
Efficiency Rating = 50 CFM/Watt (average is about 86)
An Efficiency Rating of 50 is below average.
Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of
electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more
CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if
you expect to operate several ceiling fans at the same time. (see calculator below)
Electrical Usage = 102 Watts (average is about 76)
102 Watts per hour is higher than average, so the Minka Aire Gyro in Brushed Nickel costs a little more to operate than other fans.
Use the calculator below to estimate just how much it will cost to operate this fan in "Your home".
Wind Speed Factor -vs- Efficiency: Wind Speed is KING! Ceiling fans can save you a lot on your energy bills if you use them properly to reduce your use of central air. Ceiling fans cool you off by creating a wind-chill effect, so the more wind speed a fan generates, the cooler it will make you feel. The cooler your ceiling fan can make you feel, the higher you can raise your AC thermostat to conserve energy without sacrificing your level of comfort. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills, but you cannot raise your thermostat by 10 degrees if you focus only on ceiling fans that use less energy rather than ones that generate higher wind speed. To put this in perspective: A typical central air system uses about 3500 Watts when it is running, so if a ceiling fan that uses 100 watts allows you to raise your thermostat a couple degrees higher than a more "efficient" fan that uses only 50 watts, the savings you will get by raising your AC thermostat a couple degrees higher is far more than the difference of 50 watts between the two fans. With that said, a ceiling fan that uses less watts yet produces higher wind speed is a win-win.
Performance Data
Speed | RPMs | CFMs | Amps | Watts | EPA Efficiency (CFMs/Watt) |
---|---|---|---|---|---|
High | 1350 | 5050 | 0.84 | 102 | 50 |
Med | 980 | 3400 | 0.8 | - | NA |
Low | 720 | 2900 | 0.7 | - | NA |
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing.
Operational Cost Calculator
(Instructions/Details)This label is required by the FTC to be published
by any company selling this fan on the Internet.
ENERGY INFORMATION
at High Speed
Airflow 5050 Cubic Feet Per Minute |
Airflow 102 Watts (excludes lights) |
Airflow Efficiency 50 Cubic Feet Per Minute Per Watt |
Compare: 36" to 48" ceiling fans have airflow efficiencies
ranging from approximately 71 to 86 cubic feet per
minute per watt at high speed.

Questions & Answers
Best Sellers

Starting At $319.95

Starting At $434.00

Starting At $319.95

Starting At $319.95

Starting At $319.95

Starting At $661.50

Starting At $661.50

Starting At $66.75

Starting At $115.43

Starting At $244.00
See it in a Room
Use our interactive tool to see this fan in a room setting. You can move and resize the fan image to get a better look.
Select a room type from the menu to view our galleries, upload your own photos to see the fan in your room or email us your photos and we will email you a # to enter here.

