Minka Aire 32" Supra Flushmount in Brushed Steel
F562-BS - Minka Aire 32" Supra Flushmount in Brushed Steel
- 4075 CFM (5.31 MPH Breeze)
- Brushed Steel Motor w/Silver Blades
- 32 Inch Blade Span | 22 Degree Pitch
- Rated For Indoors (dry rated)
- 153mm x 16mm - AC Motor
- 3 Speed Pull Chain
Starting At $151.10
Other Finishes for this Ceiling Fan
52" Supra SP
Ceiling Fan Comparison Graph
*NOTE: Minka Aire measures the blade distance to the TOP of the blade. Please add approximately 1/2" to 1" to estimate the distance to the bottom of the blades.
How does the Minka Aire 32" Supra Flushmount in Brushed Steel Compare to the Average Ceiling Fan?
Quality Rating = 3.000000 (average is 3)
A Quality Rating of 3 is average. Fans with this rating are decent quality, but not the best. Although the Minka Aire 32" Supra Flushmount in Brushed Steel ceiling fan will run smooth and quiet at the low and medium speeds, they may not operate as perfectly on high speed as fans rated 4 or 5 and may need more balancing during installation.
Note: CFM and Wind Speed are calculated using standard shaped 32" blades. The size and shape of the blades will alter the performance dramatically. For example: Palm style and carved wood leaf shaped blades can reduce performance by as much as 50%!
Wind Speed Factor: 5.31 MPH (average is about 3)
A Wind Speed Factor of 5.31 MPH gives this fan a Breeze Rating of 5.5 out of 5. This is over the top when it comes to wind speed, so this fan provides about the strongest breeze you can get from a ceiling fan, making the 32" Supra Flushmount one of the best fans you can buy to cool you off! Aside from Quality, which accounts for smooth quiet operation and durability, the amount of wind-chill a fan can provide to cool you off is the most important consideration.
Airflow = 4075 CFM (average is about 5,000)
4075 CFM is below average, so don't expect to feel much of a breeze from this fan unless you are directly beneath it. Fans with this low of a CFM rating will not provide enough breeze for larger rooms. If you are concerned about whether or not the Minka Aire 32" Supra Flushmount in Brushed Steel will move enough air for your needs, please give us a call and we will help you make the determination. This fan may not allow you to raise your thermostat, so do not expect to save much on your cooling bills (if you have AC).
Efficiency Rating = 62 CFM/Watt (average is about 86)
An Efficiency Rating of 62 is below average. Efficiency is defined by the EPA as the amount of airflow a fan produces (CFM) divided by the amount of electricity (Watts) it uses on high speed without any lights on. Efficiency is less important than Airflow because more CFMs allow you to raise your thermostat higher...which is where you will save the most energy. Efficiency becomes more important if you expect to operate several ceiling fans at the same time. (see calculator below)
Electrical Usage = 66 Watts (average is about 76)
66 Watts per hour is slightly below average, which is a good thing. the Minka Aire 32" Supra Flushmount in Brushed Steel will cost a little less to operate than the average ceiling fan. Use the calculator below to estimate just how much it will cost to operate this fan in "Your home".
Wind Speed Factor -vs- Efficiency: Wind Speed is KING! Ceiling fans can save you a lot on your energy bills if you use them properly to reduce your use of central air. Ceiling fans cool you off by creating a wind-chill effect, so the more wind speed a fan generates, the cooler it will make you feel. The cooler your ceiling fan can make you feel, the higher you can raise your AC thermostat to conserve energy without sacrificing your level of comfort. Raising your thermostat by 10 degrees can save you up to 40% on your cooling bills, but you cannot raise your thermostat by 10 degrees if you focus only on ceiling fans that use less energy rather than ones that generate higher wind speed. To put this in perspective: A typical central air system uses about 3500 Watts when it is running, so if a ceiling fan that uses 100 watts allows you to raise your thermostat a couple degrees higher than a more "efficient" fan that uses only 50 watts, the savings you will get by raising your AC thermostat a couple degrees higher is far more than the difference of 50 watts between the two fans. With that said, a ceiling fan that uses less watts yet produces higher wind speed is a win-win.
Ceiling Fan Comparison Graph
"-" means that the data was not available at the time this information was published or the manufacturer simply does not test for the data that is missing.
Operational Cost Calculator(Instructions/Details)
This label is required by the FTC to be published
by any company selling this fan on the Internet.
The blades are painted silver. The fan is made in China as are almost all ceiling fans that are sold in the USA. With all that is going on in the world today, many people, like yourself, are wanting to buy things that are made in the USA. There really is only one brand making ceiling fans in the USA and you'll have to overcome the sticker shock. You can about read them using this link:
Hope this helps...
Answer this Question
We do not have the dimensions specifically, but I can give you a pretty good approximation between 3 1/2" to 4". Then you need to add an additional 4" or 5" for whatever glass you choose.
If it is going on an 8 foot ceiling or higher, there should be no issues with headroom clearance.